Question Locked

XP hangs on "loading personal settings"

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My Windows XP Home [SP 2, build 2600]login hangs at "Loading Personal Settings". There is no sign of any hard disk (or other) activity, and if i leave it for an hour it doesn't fix itself! It happens whether I use the Welcome screen or not. It also happens when I create and use a new login account.

This used to happen once in a while, now it's more often than not. I can't really restore to before it started happening then - because it's so long ago that it started.

Occasionally I get past the login screen, only to see a completely blank desktop (no files, no start button, nothing on Ctrl-Alt-Del). Again, leaving it for ages makes no difference.

I have a cable modem, wireless router, two internal HDDs, two external HDDs (one firewire, one usb), two internal DVD-RWs, and a bunch of USB ports. And a wireless keyboard/mouse, NVIDIA GeForce FX 5200 display adapter, MED MD6144AO monitor. And I run antivir personal edition, no Norton.

I've come across other forum posts with similar problems, but no solutions. Usually I can log on properly after 3 or 4 resets. this morning it was rather more, and i'm worried it's getting worse. Help!!

8 replies

by mayhem1969

You mentioned it used to do it now it does it worse. Did you download any software recently? If not, have you tried loading in safe mode? If so, does that make a difference.

Make sure you run any disk utility, defrag, cleanup, etc. and then run antivirus software and any antimalware software you might have. I would start there.

by peadar

I think it's the firewire external HDD that's been causing the login problems. It wasn't there in safe mode (and safe mode with networking crashed same as normal mode). I'd had problems with this drive b4 but it was well over a year ago, now it's fallen over completely - can't get the drive to show, but no problems logging on! I finally got it up, remapped to a different drive letter, but when i tried to delete a file i got a blue screen "A problem has been detected and windows has been shut down to prevent damage.." I got it back again briefly when i switched to USB (it's a combo device - Prolific 3507).

so: problem solved - but i've now got a more serious problem, as i really need the data on the firewire HDD! I use it on a mac at work via firewire too with no problems (i'll see if i can read and back it up on monday), but on the pc it's gonzo. I used device manager to uninstall it (it was disabled) but i can't find a driver for it, just hex firmware upgrades (do i need one of these, and if so how do i use it?) I suspect there may have been a conflict with another port, but am not sure - if there was, how would i find out and fix?

by mayhem1969

You pc will boot normally when the firewire HDD is not connected? Also, your original post says that you have 2 external drives, one usb and one firewire but you mention above that the firewire one is a combo device. Are you experiencing problems when you boot with both external HDDs connected via usb? If your problem only occurs with the firewire HDD connected (usb or otherwise), it appears that you have a driver issue but most likely the HDD itself is having failure. One sure fire way to tell is, as you mention, trying to access a file and getting an GPF error. You may need to wait until you can check it on your work computer. If it doesn't work there you know it is caput.

I would think that XP would identify the hardware and add it without a problem. Sometimes you do need to install the driver first, but that is rarer and rarer since the many XP updates and SP2. If you do, you can run a Google search and find drivers to download.

To check if your having a conflict (which would be strange unless you've added a recent piece of hardware), make sure the HDD is connected and showing in hardware manager. (If it isn't it's not conflicting.) Go to start, run, type msinfo32.exe. The system information will come up. Check under hardware and you'll see your ports. If there are any problems it should show.

Otherwise, I think the most likely issue is the HDD, which is not being read by XP at startup causing the delays.

by mcmharis

go safe mode and scan the system with latest antivirus update and run check disk it will be fixing .....

by computercookie

nearly 6 months to arrive at this response!

Perhaps you could actually tell everyone why you chose this response and perhaps why you haven't suggested sysinternals or msconfig as an another avenue of resolving this problem 'just in case' "check disk" doesn't solve the problem.

More importantly,what is "check disk" and how do you run it?

by peadar

Removing and uninstalling the usb/fw portable HDD seems to have solved the login problem. The drive stopped working on the PC (even on 2 usb connections it was wheezing away), same on the mac usb (is this just not enough power?), but still works on the mac firewire @ work (tho' very hot).

I'll replace it, probably with a Freecom ToughDrive Pro 160GB USB2/FW400, which is preformatted as FAT32 and seems to have overcome (?) the 32GB partition limit ... Freecom say it's ready to go on mac and pc, yer seagate (i think freecom use seagate) doesn't recommend using fat32 for mac/pc sharing, saying it may lead to data loss: http://www.seagate.com/support/disc/manuals/external/pocket/Macintosh.htm

by hmcmullen

what we have determined is our problem is that Symantec Endpoint 11 is causing the MBR to be corrupted when it scans it (because of a virus that likes to hide there). Run the XP OS disk that came w/pc and when the screen appears that asks whether you want to install or repair, type "r" for repair. then type "1" for the windows installation you want to repair. When c:\windows appears, type "fixmbr". It will say "are you sure", type "y" and then type "exit" and then reboot pc.

This discussion is closed to new replies.