General discussion

Locked

xp not accessible

By nastavirss ·
i have an p4(1.6),512mb ddram,40 gb hdd..recently i bought a printer (lexmark) and this 512 ram(before i had 128 sd ram)recently..my xp seems to be facin a serious error(it says some page fault error) and my system keeps on restarting again and again..awaitin suggestions

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
Thread display: Collapse - | Expand +

All Comments

Collapse -

by dmiles In reply to xp not accessible

The error may be caused by the memory,which is causing the system to reboot.First check the motherboard manufacturer to see if it supports ddr ram,also if you have pdated bios
Try putting the ram in correct slot to configure to ddr spec.

Collapse -

by OTL In reply to xp not accessible

Quick check - go back to the old ram, if it works fine for a week then you have a compatibility/bad stick problem.

Collapse -

by glyall In reply to xp not accessible

Comment from glyall@iowatelecom.net on 10/29/04:
check the capacitors next to the CPU.
If the capacitors are flat on top they are good.
If they are raised they are bad.
Having just one bad capacitor will cause this problem.
You will have to replace the motherboard

Good Luck

Back to Windows Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums