After Hours

General discussion

Gravatar
Locked

Y are the Pages Printing Dark, Totally Black after Changing the Drum?.

By Dolphin111 ·
Tags: Off Topic
Hello Good people,

We have a Toshiba e-Studio 452 Printer, which we use it mainly for photocopying purpose. Recently it started printing white lines in the middle of the pages. I removed the developer unit and the drum only to find out that part of the drum had Toner stack on it, i tried cleaning it with a smooth dry cloth, but the dry toner never came out, since we have a spare drum so i just went on and changed the drum, i assembled and then put back everything in place. Know when i make copies the white lines is gone but the page comes out totally dark, completely black no readable information and the drum gets covered with toner. I spent the all day figuring out what went wrong, it seems like i made it worse. I was told the problem is at the back frame of the machine a mismatch, I just don't seem to figure it out.

Any help is well appreciated.

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
+ Follow this Discussion ·
| Thread display: Collapse - | Expand +

All Comments

gravatar
Collapse -

Repost as 'Q&A'

by HAL 9000 Moderator In reply to Y are the Pages Printing ...

Try reposting this in the 'Q&A' forum. The 'Discussion' forum is for matters of general discussion, not specific problems in search of a solution. The 'Water Cooler' is for non-technical discussions. You can submit a question to 'Q&A' here:

http://www.techrepublic.com/forum/questions/post?tag=mantle_skin;content

There are TR members who specifically seek out problems in need of a solution. Although there is some overlap between the forums, you'll find more of those members in 'Q&A' than in 'Discussions' or 'Water Cooler'.

Be sure to use the voting buttons to provide your feedback. Voting a '+' does not necessarily mean that a given response contained the complete solution to your problem, but that it served to guide you toward it. This is intended to serve as an aid to those who may in the future have a problem similar to yours. If they have a ready source of reference available, perhaps won't need to repeat questions previously asked and answered. If a post did contain the solution to your problem, you can also close the question by marking the helpful post as "The Answer".

gravatar
Collapse -

Thanks

by Dolphin111 In reply to Y are the Pages Printing ...

I will do as suggested.

Back to After Hours Forum
2 total posts (Page 1 of 1)  

Start or search

Related Discussions

Related Forums