Question Locked

2 isp in a 22 stations(pc's to be connected)

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have a small cafe in our hometown. but the maximum speed that this isp can give is only 1
.5mbps. i have 22 pc's sharing in this one same network. i requested to upgrade the speed hence accdg to them cant offer higher than 1.5..so i requested instead for another connection..another 1.5 acc to have 2dsl line. my problem is i cant set-up just one network..1 have 2 routers and 2 12port switches...thanks

3 replies

by Former member

You have:
1). 2 routers
2). 2x12 port switches.
So all you do is have the setup the same as now, but just have 11 computers connected to one switch.
Now for the second network you just set it up similar to the first with 11 computers setup on the 12 port switch
The networks will have one router each, so you will have something like this, but it will be twice:
internet > router > switch > 11 computers.
The ">" means connected to.

Please post back if you have any more problems or questions.

by dumphrey

I am looking into similar gear for fail over as opposed to aggregate bandwidth.

Linksys makes a device, the RV082
http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1115416833289&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=3328954480B04
That will load balance or fail over between 2 isp lines. but, reviews I read had some not so good things about product longevity. But for ~$300 its a buy.

So far, the
http://www.peplink.com/products/balance-30/
is my #1 pick, though its early days yet in research land.
$500 is steep (compared to Linksys, still dirt cheep compared to Cisco), but it has 3 isp lines and seems to have a more robust life expectancy.

HotBrick makes a sub $500 load balance firewall,
http://www.hotbrick.com/produto.asp?tipo=3&catpro=2

Another option is to build your own with a commodity case, 3 netcards, a switch and pfsense, ipcop etc..

This discussion is closed to new replies.