General discussion

Locked

3 segments on one network

By dmvillanueva ·
We have an existing network with 3 segments (172.16.1.x/172.16.100.x/172.16.95.x) the problem is all of our server resides on .1 series how can the other segments access the servers? I only have one router which also in .1 series..

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by hozcanhan In reply to 3 segments on one network

for a cheap solution put 3 NICs on the server and enable routing or install a routing software on it . Second cheaper solution . Use a low level PC with 3 NICs . Load a firewall and routing software on it . That should help you . Third and expensive solution is buy a professional router with 3 eth ports .

Collapse -

by adembo In reply to 3 segments on one network

You need a router to connect one network to another. Either use a hardware router (Cisco, 3COM) or use a software router (Using multiple NIC's and configure it in the OS)

Collapse -

by avayaconsultant In reply to 3 segments on one network

Set up teh servers on different VLANs and the route between VLANs if needed. That is what we do on our Extreme switches.

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums