7 replies
by sgt_shultz
by arichart
motherboard looks good and I've tried several batteries.
by shiny_topadm
Hi, there are a few things to check:
1) the new battery could be bad, check with a voltmeter or by replacing again.
2) the battery isn't making a good connection in the holder or isn't inserted correctly for polarity (+ / -). Some battery holders will physically accept either orientation, but only one is correct electrically!
3) some bios value is wrong. Does the system keep the date and time? Does it "save & exit" (what you need) or just exit?
hope this helps...
by arichart
Batteries are good, polarity is correct, and the bios lets me save, but defaults when the power cord is pulled. Almost makes the bios seem like RAM instead of ROM.
by brddog
Two things that come to mind:
1) Finger prints on battery, too much body oil will cause poor contact.
2) Bios "clear" jumper is installed.(Primary choice of problem)
by arichart
Tried several batteries and nothing worked, must be the mobo
by arichart
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending