Desktop

General discussion

Gravatar
Locked

Booting the computer from the flopy

By salahkasem ·
Dear sir,
ihave Board (KA11)from the FIC company,and when i was need to boot the computer i did not ,a way to boot the the computer from the floopy,can you help
me to solve this probleme ,thank you.

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
+ Follow this Discussion ·
| Thread display: Collapse - | Expand +

All Comments

gravatar
Collapse -

Booting the computer from the flopy

by RCOM In reply to Booting the computer from ...

You need to change the boot order in the system BIOS.

CAUTION: DO NOT CHANGE SETTINGS OTHER THAN WHAT YOU NEED, THE COMPUTER MAY NOT BOOT IF THE WRONG SETTINGS ARE SELECTED.

Usually to get into the BIOS you need to hit the delete key as prompted when the computer first boots. The boot order is usually listed in Advanced (second choice on the left). Look on the bottom of the screen to see how to change the settings. Usually just use the arrow keys to get to the item you want to change then use the page up and page down key to make the changes. In some cases you may have to arrow down to the selected item and hit the enter key and arrow through the list of choices.

THE settings YOU WANT IS,

FIRST BOOT DEVICE= FLOOPY
SECOND BOOT DEVICE= IDE 0

Save your choices and exit.

Back to Desktop Forum
1 total post (Page 1 of 1)  

Start or search

Related Discussions

Related Forums