Question Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Ho do I bootup a scsi drive in windows server 2003 to acess the data in a hard drive where the os is not booting for bad sectors reasons
2 replies
by taiwoadeyanju Accepted solution
Clarifications
by oh smeg Accepted solution
To a Higher SCSI Address than the boot drive If you have no RAID Array working you should now show the Old SCSI in My computer listed so you don't actually need to boot the Drive. Just attach it to a Running computer. and copy the Data from this drive to the Working System.
Of course you may be required to run some utilities to mask any Bad Sectors depending where they are so that the drive is readable and if there is a Bad Sector in the Data Cluster any data that should be residing there will not be recoverable.
Col
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Locked
Internet connection perfect on PC, not connecting anywhere else
0 helpful
4 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies