Desktop

Ask something
Discussion Locked

building DMI and verifying DMI......

0 helpful
8 replies

by trinhpham54

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a problem,when power up the pc, passed the memory check and then building DMI, verifying DMI.....THE system stop right there forever. what is the problem? what is DMI? BIOS PROBLEM? I changed the boot sequence, still not booting up to the OS?ANY IDEA? thanks for help.

8 replies

by trinhpham54

my system is AT, AMD K5 using windows 98, and I also checked the HDD LED,and the TURBO is off the mainboard, what is TURBO SW,I am supposed to put it in the mainboard?

by azraelissime

1. Go into the BIOS Setup (by pressing "F1" while computer start to boot in many cases).
Reagarding to your BIOS, press the key to select Setup Default (normaly "F5"). Then Save and Restart.

2. If it didn't work, try a "Clear CMOS". You'll have to open your computer and move a jumper (also depending on your motherboard). Restart, switch off the computer again, replace the jumper and restart.

by modijayesh01

Go to CMOS & autodetect hdd.
Boot the system with bootable disk of OS on your pc. (If your PC has win 98 use win98 boot disk. For Win95 use win95 boot disk).
you will get a:>sys c:

Remove floppy from drive
Reboot.
good luck

This discussion is closed to new replies.