Desktop

General discussion

Gravatar
Locked

CALL ING C.P.U GURUS

By azizhakim ·
IT FEELS ODD TO ASK THIS,BUT THE FELLA AT THE PC STORE SAID IT IS OK, BUT I NEED A FEW
MORE CONCRETE THOUGHTS-HERE WE GO?I HAVE AN OLDER NEC COMPUTER THAT HAS A 200 MHz INTEL
PENTIUM.INTERNAL SPEED-33MHz.IT HAS A INTEL
TRITON CHIPSET.I PUCHASED AN AMD K6-2 CPU 333
MHz.MY QUESTION IS IS IS POSSIBLE TO REPLACE
MY CURRENT CPU w/ MY NEWER AMD.I HAVE ALL COMPONENTS REMOVED BUT BEFORE ANY ATTEMPTS TO
CHANGE IT-I WOULD LIKE A LITTLE INPUT. THE
PERSON AT THE STORE ADVISED I COULD-THANX,FOR
EVENA SHORT INPUT OR ADVISE---AZIZ

This conversation is currently closed to new comments.

11 total posts (Page 1 of 2)   01 | 02   Next
Thread display: Collapse - | Expand +

All Comments

gravatar
Collapse -

CALL ING C.P.U GURUS

by calves In reply to CALL ING C.P.U GURUS

It all comes down to what your MotherBoard supports. Usually, mfrs will build separate types of MB based on the type of CPU that will run in it. You can try it. Is not going to **** up or anything. All that it will do is "nothing", if the processoris not right for the MB.

Good luck!

gravatar
Collapse -

CALL ING C.P.U GURUS

by azizhakim In reply to CALL ING C.P.U GURUS

thanks so much-you were,it just did not do anything-nothing came up on the monitor,i just reversed the whole procedure & i am ok-thanx for such fast responce

gravatar
Collapse -

CALL ING C.P.U GURUS

by azizhakim In reply to CALL ING C.P.U GURUS
gravatar
Collapse -

CALL ING C.P.U GURUS

by azizhakim In reply to CALL ING C.P.U GURUS
gravatar
Collapse -

CALL ING C.P.U GURUS

by mphoffar In reply to CALL ING C.P.U GURUS

If Im remembering correctly, I don't beleive there are any motherboards with the triton chipsets that will support the K6-2. If it was an older K6-333, I wouuld agree with the guy at the store, but I was always under the impression (and I could be wrong about this)that the K6-2 required the 100mhz bus to work correctly.

Personally, I think you'd be better off spending the extra 100 dollars for a motherboard and still transfering your components over

gravatar
Collapse -

CALL ING C.P.U GURUS

by azizhakim In reply to CALL ING C.P.U GURUS

thanx--you are absolute right.the fella who sold me my cpu--what can i say, but he was completely off,kinda glad i approached tech-republic ,--lots of thanx 4 fast responce

gravatar
Collapse -

CALL ING C.P.U GURUS

by azizhakim In reply to CALL ING C.P.U GURUS
gravatar
Collapse -

CALL ING C.P.U GURUS

by azizhakim In reply to CALL ING C.P.U GURUS
gravatar
Collapse -

CALL ING C.P.U GURUS

by bge1 In reply to CALL ING C.P.U GURUS

Without knowing specifically what model motherboard you have, it isn't possible to be 100% sure. Having said that, I don't think your CPU and motherboard are going to work. Your motherboard has to be able to support either 66 or 95 MHz for the 333. Your motherboard will also have to support the correct CPU voltage settings, both core and I/O. I don't know that I would recomend hooking your CPU up to the wrong voltages just to see if it works. AMD provides a list of recommended motherboards on the web. Using one of those will limit your problems. Good luck.

gravatar
Collapse -

CALL ING C.P.U GURUS

by azizhakim In reply to CALL ING C.P.U GURUS

thanks-it most certainly did not work-no life
on my monitor,nothing comes up on the screen,i just gave it up &went back to the earlier pentium,alyhough i got my jumpers all mixed up,but it is a learning process,thanx once again--aziz

Back to Desktop Forum
11 total posts (Page 1 of 2)   01 | 02   Next

Start or search

Related Discussions

Related Forums