Question Locked

Cannot obtain IP address

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Good Morning.
I work at a small computer shop, doing repairs mostly.
We have a very basic network, default settings, no security, which we use to test peoples ability to access the internet. It's a linksys router that we plug peoples computers into.
I have one computer that cannot obtain an ip address. All the other computers plugged into the router get one with no problem. If I unplug this computer, and plug another into the router, it gets one.
The computer is a Dell E510 running Windows XP Media Edition SP2.
Onboard Intel Pro100 nic.
What on this computer can prevent it from obtaining an IP address??

8 replies

by seanferd

DHCP might be off. Check the TCP/IP settings.

Maybe even the firewall.

by robo_dev

if the network adapter is faulty, it may be receiving data, but not sending it.

Assuming that the link light is on, manually set the IP address to a static value that does not overlap with any devices on the lan (e.g. 192.168.0.245). See if you can ping any device on the local lan, and if any devices can ping it. If that does not work, then it's either a hardware failure or something like a corrupt TCP/IP stack.

To sort out hardware versus software, boot with a Linux Live CD. If that works fine, then it's a software issue. You just download the iso, burn it to CD and reboot.
http://www.slax.org/

sometimes viruses/malware can mess up the TCP/IP stack, so you must do a TCP/IP stack reset. In extreme cases you must reinstall the TCP/IP stack.

support.microsoft.com/kb/299357

by tstreich

Worked fine immediately after uninstalling/reboot.

by mpramage

Thanks for the replies.
I ran ran a full virus scan, found a couple instances of maleware and removed them and then uninstalled the nic and reinstalled it and now it works.
Had to do both before it worked correctly, and since I did the uninstall and reinstall last, I assume it was a driver issue...although it may have been the malware that corrupted the driver, I guess.
Thanks again for the responses.

by seanferd

That stuff likes to call home, and will mess with various bits of networking capabilities of the OS.

by shinj888

I think your network has a DHCP Server, and with this, everytime a computer is connected to your router, that server automatically assigns an IP to a new connected computer, if and only if you set your TCP/IP properties: "DHCP Enable"

But if you assign it at static... it surely will not obtain an IP from your router..

hope that helps!

This discussion is closed to new replies.