Discussion Locked

Can't Connect to a VPN behing a linksys

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I setup the VPN in a stand alone server using incoming connection. I opened the ports 1723, 500 and 47. I can connect from inside the router, but when i tried to connect from outside get freeze when is verifying the user and password and I get and error msg. I'm using a Linksys BEFW11S4 ver.4

Thank you

6 replies

by rheal.dugas

How or what are you doing to open up the ports on your router?
the same router and to open a port to 3874 I had to put the information into 2 or 3 places.

Another thing you can try is to enable DMZ on your router so you can test the connection to your VPN. This will open up all the ports on your router. If you still cannot connect or still freeze up with this open than it may be a problem on the PC and not the router. Remember to Disable DMZ after you do your test.

Let me know the results...I have a solution that I had to use to get my VPN working but I was able to connect but would kick me off after about a Minute or so. If the above doesnt work we may try this other solution.

by derbybonilla

Yes I had the DMZ enable and the PPTP enable also on the router when I connect from the LAN I got connected with no issues. is when i tried to do from the internet.

What is your other sugestion, the last that I did was upgrade the firmware on the router but still not connecting. thank you

by cg it

The linksys router has a PPTP passthrough that you need to enable as well as fowarding ports 1723 to the server.

by derbybonilla

Yes I had the DMZ enable and the PPTP enable also on the router when I connect from the LAN I got connected with no issues. is when i tried to do from the internet.

What is your other sugestion, the last that I did was upgrade the firmware on the router but still not connecting. thank you

by rheal.dugas

Ok what I di to get mine to work was add a line into the register telling it to not check to see is the Router tables have been updated.

HKEY local\System\current Control\services\tcpip\Parameters\

Create a new DWORD entry and call it "Perform Router Discovery" Value should be set to zero.

With this added Win Xp no longer gave me the error and wouldnt kick me off.

by rtang626

Hi,

I am a novice at VPN configuration. I read this post, and have same problem here. I have same router. Did you manage to get this resolved? If so, can you provide some help? Thank you.

This discussion is closed to new replies.