Discussion Locked

Changing a Motherboard and a CPU on a Wi

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Now the system dont start
How to reset the drivers and hardware configuration and mout a new
Motherboard and CPU and find the new hardware???

URGENT Please

7 replies

by dmiles

Once you have the motherboard installed in case,insure that it is not touching the metal

Check the connectors on the motherbaord to make sure all are secure and properly inserted securely

Mount the cpu in the socket in correct,check that pin orientation is correct

Install the minimum hardware in the machine to get it started
Memory
Graphics card
Plug computer into wall socket and check that switch on the power supply is in On position

Now power the computer up,insert Chipset cd in drive,it should auto start,this will install the drivers to your motherboard,once this is complete restart computer and when the startup screen appears,press designated key to enter Bios,use the motherboard manual to follow the configuration to set up Bios panel

If this fails then you should start troubleshooting,by checking the power supply,motherboard.and cpu

by jailbreak

No. This is not my problem.
The problem is that after i upgrade the PC the Win2K thid not work.
Say NOT-BOOTABLE_DEVICE on Win2000 startup, because th win2000 do not like upgrades on a SO that already install in a harddisk.
After i put the old motherboard and old CPU the system start just fine.
Is a Windows 2000 problem not hardware

by timwalsh

Check out MS Knowledgebase article Q271965
"STOP 0x0000007B" Error After Moving Windows 2000 System Disk to Another System"

I have followed the procedure listed under "More Information" several times to accomplish what you are describing.

Good luck.

by timwalsh

I should add that this procedure will solve the HD drive access issue. Once the computer boots, you will still have to go through the process of updating any motherboard drivers with the CD supplied by the manufacturer.

This discussion is closed to new replies.