Networks

Our forums are currently in maintenance mode and the ability to post is disabled. We will be back up and running as soon as possible. Thanks for your patience!

General discussion

Locked

Cisco and Microsoft DHCP

By abhijitm00 ·
Hi,

We plan on moving our DHCP server from a Cisco 2611 to a Windows 2003 Server, the reason being we are adding a branch and we plan on increasing the number of hosts plus it should be easy to administer. We plan on adding a DHCP relay agent at our branch office.

What kind of settings need to be changed on the client side? Router side?

As far as I know I need to create a new scope on our Windows 2003 DC, activate it, delete the lines of code on the Cisco router about handing out DHCP. Am I missing anything?

TIA,

Abhi

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Comments

Collapse -

by CG IT In reply to Cisco and Microsoft DHCP

might have to create reservations and make sure options in DHCP are set. Maybe release and renew on clients.

Collapse -

by abhijitm00 In reply to

Poster rated this answer.

Collapse -

by HAL 9000 Moderator In reply to Cisco and Microsoft DHCP

While this isn't exactly what you are doing the basic prinicipal is the same

http://tinyurl.com/s7c9p

This will give you the details on setting up the DHCP on the 2003 sERVER

http://tinyurl.com/o6856

I hope that is of some assistnce to you

Col

Collapse -

by abhijitm00 In reply to

Poster rated this answer.

Collapse -

by abhijitm00 In reply to Cisco and Microsoft DHCP

This question was closed by the author

Related Discussions

Related Forums