Question

Locked

Cisco ASA remote access VPN

By ugirishknair ·
I had configured cisco ASA 5510 for the remote user to dial through the internet facing interface. The users once dialed in should be able to connect to the servers at another location through am MPLS interface. The internal network users are PATTED to the MPLS interface to access the remote network. while the internal users are able to access the remote network while patted, the dial in vpn users are note been able to connect to the same servers while dialed in. Is there any way to do this.
I had enabled same-security-intra/inter
and nat traversal is also enabled.
Please help

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Cisco ASA remote access VPN

by jkofinas In reply to Cisco ASA remote access V ...

I know with the cisco client you have the option to denny/allow access to specific hosts and or networks.

You can configure that under the remote vpn groups. Either with split tunneling or just plain and simple firewall rules.

Back to Networks Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums