Question

Locked

cisco pix 506e

By badrulislam ·
i'm able to ping inside interface of pix from my host pc,but cant ping outside interface.plz if any one can help me,i'll be happy.

host pc:192.168.1.5

and here is my pix configuration:
pixfirewall(config)# sh run
: Saved
:
PIX Version 6.3(5)
interface ethernet0 10baset
interface ethernet1 10baset
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list acl_out permit icmp any any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 115.127.11.230 255.255.255.240
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 115.127.11.237
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group acl_out in interface outside
route outside 0.0.0.0 0.0.0.0 115.127.11.237 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
username pix506e password JGFGsIHZQfRU8crz encrypted privilege 2
terminal width 80
Cryptochecksum:b7e30b83528f956a0dad14016a74ef18
: end
#

This conversation is currently closed to new comments.

4 total posts (Page 1 of 1)  
Thread display: Collapse - | Expand +

All Answers

Collapse -

Can you ping your PIX's Gateway

by NetMan1958 In reply to cisco pix 506e

it looks like it's 115.127.11.237?

Collapse -

Also

by NetMan1958 In reply to cisco pix 506e

based on this:
ip address outside 115.127.11.230 255.255.255.240
This:
global (outside) 1 115.127.11.237
Should be this:
global (outside) 1 115.127.11.230

Collapse -

error on global

by badrulislam In reply to Also

hi netman
thank u for ur help.

when i'm going to create global as ur mentioned,its showing following error message

pixfirewall(config)# global (outside) 1 115.127.11.230
ERROR: 115.127.11.230-115.127.11.230 overlaps with outside interface address

please do help more for me

Collapse -

Try this

by NetMan1958 In reply to error on global

global (outside) 1 interface

Back to Networks Forum
4 total posts (Page 1 of 1)  

Related Discussions

Related Forums