Question Locked

Cisco works problem

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Status: We newly installed the cisco works monitoring tool in our organization.

Problem: Campus manager>topology services> layer2 view>display view:
When i see the network diagram, i see all my devices & links red(inactive), which is wrong i actually can ping and telnet all the devices through command prompt and also through cisco works.

Question: what is the reason for which i m not able to view proper network topology.

Things Tried: I tried by doing the discovery devices and also tried the data collection options, but still the same result.

I would be thankful to the techieez of techrepublic if i get the solution.

Regards

Anwar!

6 replies

by fregeus

Did you configure your SNMP correctly? Cisco works use that protocol to talk to its devices. Discovery will discover devices with ping and add them to your database, but if they are not SNMP configured, they will not talk to your Ciscoworks monitoring software.

TCB

by mohdanwarahmed

thnx for ur post TCB!!!

twice i got the devices activated till now, yesterday once i got them active and today in the morning as well.

once i close the topology service, the next time i open it, i see the network diagram as red....

is it the problem with snmp????

by fregeus

Red usually means that Ciscoworks cannot talk to the device. I would make sure that all community strings are correctly spelled out. That the passwords are correct and that the server is identified correctly.

My money is on that, but without more information, I can't be 100% sure. Did you check the Ciscoworks logs to see if there are any clues there?

TCB

by mohdanwarahmed

can u help me out in this regard??

Can you give me the idea how to change the hostname of the device through ciscoworks.

also i heard that the password of all the devices in the network can be changed in one shot i.e globally we can change the password of all the devices at once in cisco works. Can u tell me how to do this??

thnx in advance!!!

by mohdanwarahmed

see this path...

campus manager>device discovery > snmp settings

here snmp v2 option is checked, under that there are two options

1. enable multiple community strings
2. ecrypt community strings

these both options are unchecked. Is it supposed to be checked??

This discussion is closed to new replies.