Discussion Locked

compaq proliant; anybody ever ran one?

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i just bought this dual p3 500mhz proliant havent figured out what i should really do with it yet.
i put regular xp pro on it. i have 2000 server. would xp server or 2003 server be any better?
what i am really curious about is the raid. i know it but not sure how to set it up. the card is compaq array 221, standard for proliants, i think. upon boot, it says card not configured and it find neither of my two drives, so i had o connect them to the internal scsi, which does not support raid. it asked for a config disk buit i dont think it is a physical disk that needs loading is it? thanks

8 replies

by lsmith1989

You have to download SMartStart for most proliants. You can get it at www.hp.com

SmartStart is an automated way of installing an OS and configuring the Raid array.

If you wanted to configure the Raid array without ssmart start, you may need the config disk for that particular smart array card model which can be downloaded on HP.com

by jbaker

There are a couple of ways to do this. Smart Start is probably the easiest. You should be able to download it from HP's website. Look under support for the particular model of Proliant that you have. If the card is a Smart Array, you can set it up directly from the setup screen for the card. I cannot remember if that card has that capability. Power on the machine, and see if it says something about entering SCSI or RAID setup.

by tmecimore

I don't think that the SA 221 has the setup feature on boot. I had to use the smartstart CD to get it going.

by jkatju2005

Well... I've been working on compaq proliant servers for 4 years now. you bet...they are the best ones we've got. As for your problem... try installing Windows server 2003 on your server and i'm sure your problem will be solved. In case of any problem do drop a line... my email id is jkatju2005@gmail.com and jkatju2002@yahoo.com.

regards... Jayant :-)

by widowmaker

Yep it definately sounds like you need the smartstart cd. I have a quad xeon 500 proliant 6000 that I am running Clark Connect on. It runs very very well on it. I migrated from win2k server to linux about a year ago, and haven't looked back. Good luck with your proliant man, I have two of them, and love them both. They have been real work horses for me.

by sverrier

We've standardized on DL380 running Windows 2000 and 2003 server. Always used the Proliant Essentials Foundation Pack Release 7.01 SmartStart and Manager CD - wouldn't try an install without 'em. Our latest DL380 came with a bad onboard Gigabit NIC which required replacement of the motherboard, but other than that we've never had a problem and they're reliable powerhouses. I wouldn't go with anything else.

by bam1of2

Use the SmartStart disk. For a Proliant PIII 500, you may need a SmartStart 5.X or 6.X image for that model. You can run Support Pack 7.3 after the OS is set up to update the drivers and Firmware Maintenence disk 7.2 for all firmware updates. http://h18004.www1.hp.com/support/files/server/us/subscription/ssdownloads.asp
For server hardware, I would suggest a server operating system. What model do you have? The SmartStart's automated setup may not offer Windows XP as a choice. You would need to do a manual setup. If you don't use the SmartStart disk, you will need to download the drivers for the Smart Array 2 series and hit F6(?) during the OS setup and install the drivers for the OS to see the hard drives. You will also need to download the ACU and the utility to setup the diagnostic partition. If you have a "F10" choice during boot, you may still have a diagnostic partition. The SmartStart will do it all for you and create an answer file for the setup. If you only have two drives, Raid 1 (mirror) or Raid 0 (JBOD) are your only choices.

This discussion is closed to new replies.