Compaq won't power on
Compaq prasiaro 7470 mini tower won't power on. good power to the machine but has electronic switch. the swithc clicks but won't power on. Is there anyway to isolate the power supply from the mother board?
Thanks Art
Desktop
Compaq prasiaro 7470 mini tower won't power on. good power to the machine but has electronic switch. the swithc clicks but won't power on. Is there anyway to isolate the power supply from the mother board?
Thanks Art
by an_it_guy
This is the last thing u want to try:
The Power-On electronic switch would be connected to your motherboard via a cable, you can remove that and 'short' the pins using a spare 'jumper'. By doing this, your power-on for the pc will be directly from the power that you give to the machine.
Dont try if u r not sure of this.
Best of Luck.
by abarney
by thechas
Actually, it is very likely that the power supply itself is bad.
The simplest test, is to swap in a known good power supply.
Chas
by abarney
by thechas
I should have read your question better.
Yes, you can isolate the power supply itself.
If it is an ATX style supply, you can unplug the power supply, and connect it to a test load.
You can find one for under $15 at www.compgeeks.com
look in the accessories section of the Case and Power Supply area.
This is a pretty limited test, but should help narrow the source down to either the power supply, motherboard, or switch.
Chas
by abarney
by abarney
This discussion is closed to new replies.
Sort by Trending