Question Locked

Computer turning off and on, on its own....

0 helpful
139 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is page 2 of the discussion. Read the opening post

139 replies

by slayer_

I had a look in the bios, there is a lot of "wake on" options, but non for lan, closest is wake on dial, or wake on PCI event. All of them were turned off though, and still are.

by seanferd

What about the device properties for the NIC in Windows? Power Management tab.

by slayer_

How do you access device properties for a NIC within windows? I only know of the connection properties.

XP Pro SP3 32bit.

by bsharpe37

Have you tried putting it in your microwave? If you haven't you should, Once it's all cooked good, you should go to Newegg.com and buy another PC. Either that or Re-install you OS and see what happens.

Take it apart. Take every piece of your computer apart, then put it back together. Make sure everythign fits good. Make sure you have you RAM in the correct positions.

Would it be possible to get an entire hardware list of your system and installed OS version.

The BIG Question I didn't see anyone ask ( I may be wrong there were a few wall of text posts i skimmed), What Changed? Obviously it wasn't like this from day 1? New hardware - you mentioned you installed a USB hub, did it hagve a driver that faults when under powered by a board causing a short in a wire?

Maybe just maybe if you have another computer around, change out that computer with this one for testing purposes. Does it Restart when you walk by it?

If no then we can rule out a power supply issue, I think the gremlins would have given up by now also.

OK, saying it doesn't restart after moving you 2nd machine into the same location of this machine does moving the faulting machine to another location solve the issue?

Saying NO, it still has the same issue in another location, lets try changing some components. Take the faulty machine and throw it out your window ( Not really) get your good machine and thiis one change out each component one at a time. Start the system and Test.
Yes this is a lot of run around work to find a solution but seeing that there is such an a large amount of replies it's time for some real troubleshooting. That right PCMechanic.com fix's all issues LOL JK.

Change out you hardwarte with the unit in question with known good. If you have changed out every pice of hardware except the motherboard, then Try changint hat out too.
Still having the same issue? after changing out the hardware? 100%
Look in the case, is the board correctly grounded to it's case or did someone forget to put some spacers in it?
All the wires from case plugged into mainboard in correct locations as per diagrammed when you got the board?

Lets say it's all correctly grounded in the case, 100% of the hardware was changed out and even the HDD and OS were changed with all cables correctly connected. SO theres no External sensors built into you case such a IR ect?

Lets say No there's nothing special about this desktop. So whats that leave us with? Well if its not a internal issues with the desktop lets move external.

Cabling I know there were several people posting about it. So you moved your desktop and it still has the same issue. Well. Lets start Unplugging all the extra crap you have plugged in. Even that nifty surpe protector. Yes we are going to use the standard wall socket! "WHHAAA!" Thats right, plug 1 monitor in and the desktop into the wall. Nothing else. Plug just your monitor and PC in to eachother ( VGA I assume) - Do not plug you your Mouse Printer Portable Cellphoen charger or keybaaord into your computer at this point. Then Walk by it.
Still rebooting?
Ok so its not a mouse or keyboard issue, GREAT - Well i figured it wasn't but couldn't hurt to test. Also you were able to test if the system was getting under powered or Circuit overloading.

So lets say it is still doing it, you have friends right? Well lets say you do, take the PC to their house with your monitor and keyboard and mouse. Thats right box it all up.

Say you arrive at their house, Install your PC at their house, walk by it, does it still reboot? This will test is the wifi signal theory someone suggested was causing an issue. ( That is assume your friend doesn't live next door or near a super mall of wifi's)

Lets say the issue still happens, you even hooked it up on his kitchen counter so that it's not touching the floor and is correctly grounded. You even left your gremlin at your house. Hum, at this point it';s looking fairly strange...

So lets take another approach, take all your hardware out and out it in your other computer case, YES Change cases. We probably could have done this sooner but I didnt think of it till now. Luckily you can arrange these in any order you want.

So we changed out the hardware into your other case and the issue still happens, well at this point we just ruled out the case, all the hardware all the software independently. SO Something much be conflicting with each other. Time to look into compatibility. Lets check each piece of hardware. You had mentioned you video card had some trouble seeting correctly. well lets swap it out and test with one that is approved.

Do the same for each hardware.

So you issue still persists. I believe you have gained super powers to restart your PC by walking in-front of it, a task I could only hope to achieve as my users forget to restart their computers before they call me. That or there's something wrong as I ran out of IF-Then statements. :)

by slayer_

Ok, go over these 1 at a time...
Can't be OS cause it can reboot during POST.

I can give you a rough list, not by model number

AMD 4800+ Duel core
Asus board with nForce chips
nVidia 9600 GT
Antec 550 Watt PSU
Soundblaster Live 24Bit sound card + onboard sound, both are active and in use.
4 Seagate HDD's of different sizes
2 DVD drives, one reader only, one is reader/writer. Reader/writer is new.
Standard floppy drive.
RAID controller for extra IDE plugs.
It has 3gb of RAM (3 chips out of 4 slots)

The only significant changes I can see is that DVD drive. I intend to unplug it to test if it is the problem. I unplug that USB hub when I turn the computer off to prevent damage to the PSU from the low draw of electricity.

The computer sitting next to it is not restarting when I walk passed it.

Computer parts are expensive, even the cheapest pieces, if I need to buy new parts for the computer, every part to test it, why am I bothering, I'll have enough parts for another computer. Otherwise, I have no other computers that are within 13 years of that computers hardware.

The board has been in use for about 2 years before I moved, it is possible something got shuffled in the move, when I take it out to open it up and re-hook up my video cards HDMI audio cables, I will check that (Or when I get a new video card and power supply, whichever happens first)

Lord knows if they are all in the correct locations :). I was thinking recently, the HDD activity lights have been broken for ages, the wires to them are broken. The wires run to the door, and then inside the door. But right at the hinge, the wires are bent each time you close the door, resulting in them breaking. Could it be possible that my walking by sent just enough electricity down one of those lines to freak out the mother board and cause a restart? Could this explain why the problem seemed to stop happening when I closed that door?

Of course there are no IR sensors, would be pretty useless on a desktop, especially pointing forwards at a user.

Surge protector is gone, still had the problem.
I can try unplugging some devices, but do those devices even draw full power during POST?

My condo is only slightly bigger than my friends bedroom, no way in heck could he have room to try that, though it would be cool if we could :).

My gremlin always travels with me, he sits in my car and play swith the ABS and check engine lights.

My video card has no trouble "seeting" correctly, it seats perfectly. Randomly the computer will restart if you jiggle the video cables. This has happened for awhile now. Leads me to believe this is all related to some failure of the video card.

To restart a computer remotely, use the shutdown command with the appropriate switches.

by slayer_

Forgot to mention, this was happening when I had nothing hooked up via USB. While investigating it the first time, I figured while I was back there, I'd finish hooking up all my toys :) .

by peconet tietokoneet

Place the computer on its side and then restart it and then do a walk past it and see if reboots by itself. If it does not then something is loose.
Other than that i will say your computer is asking for for your help the only way it knows how by rebooting to grab your attention.
Very weird situation you have. I have not heard or seen this happen before, only beeps to say either the video card is not slotted in properly or missing memory. Take it apart completely and give everything a good clean including your processor and heatsink, i do this every six months with every one of my computers (five altogether). It takes me about four to five hours on each one then i do a test to find out if i missed anything out. Your issue is very weird, i would put it in the town museum for being the only computer with a ghost attacted to it. :)
Hope you find out what is causing the issue.

by slayer_

Sadly it stopped restarting again, will have to wait for it to break again before I can try putting it on its side.

Maybe the gremlin is on vacation?

I had an idea though, maybe I should just re-overclock my video card, if it can run stable at the clocks it used to run a year ago, its probably fine, if its now unstable, its probably dying.

by seanferd

You know, I've never seen a computer do this, but plenty of other electronics (stereos, TVs, etc.) turn on by themselves. Because most stuff is never really off, but on standby. Half the people I know who have also seen this will insist that it is caused by visitations from "the" spirit world.

by nick_bear

I believe your computer can overheat. Check Bios settings you'll find the answer there.

by slayer_

Its running nice and cool according to speedfan and the bios temps.

by meghal.shah

check for the proper power connection in the Room. Have a proper Electrical

by slayer_

I could always run an extension cord from another outlet and try that...
I don't think I have a thick enough cord available that is long enough to escape that breaker circuit.

by seanferd

Ah - you can get that via connection properties (with like 8 clicks), or go straight through the Device Manager.

by slayer_

Just looking at this on my work computer, I see a lot of options. but "Wake up Capabilities" sounds the best. Which do I want?
"Both"
"Magic Packet"
"none" <-- I assume this one, but just being sure.
"Wake up frame"

by slayer_

Thanks for the offer, but I think I will just go for the massive upgrade and get some new blindingly fast speed out of my machine again.

by alatech

Computers are so much fun when they do something weird until it is absolutely irritating. I have read for the most part the conversation and find that some people don't read the previous posts :). I Thought many of the similar considerations and if indeed this machine is still acting consistently in this manner; there is one other thing I have not seen mentioned yet.

I could indeed have missed this but what got me thinking of this possibility is that someone mentioned electric contacts like in stereos, we have such a stereo if plugged in it will mysteriously come on. This problem is dusty contacts in the (drum roll) POWER SWITCH. It may indeed that with all the reasonable solutions which I would have thought too; that the real culprit here is possibly the simple power switch at the front of your machine. Changing the way it lays may possibly shift the minuet weight of the switch to 'solve' the problem for now; and yet the problem may still exist tho dormant for now.

Given what sounds like so minor rough treatment of the machine, there may be wear or dust inside the power switch that the slightly different motion is just enough to activate 'the ghost'. This is also evidenced by that while you are not walking by it works normally; maybe even have someone else walk by while YOU are sitting at the machine as you normally would; have them walk the 'offending' path.

Possible solution: Replace the power switch.

Let me know. I am eager to know the final solution.

by slayer_

I'm thinking reset button, but yeah, its definitely possible. How do you disconnect those to find out?

by alatech

It varies between vendors. Some of the switches if you look will have slide connectors on those, some unfortunately soldier them in thus you would need to trace those wires to the Motherboard connection and unplug at the motherboard. It should be a simple slide plug. Of course use a ground strap so that you do not fry any of the components.

The reliability of these switches is very good, but they can of course get damaged. Your machine does not sound old enough for wear issues. I have some antiques that still work fine in that area. Which means in one of your moves you may have had excess pressure on one of the switches that may have given the circumstance for the current problem.

Someone else may have to answer this part tho...The reset switch might not have to be connected for the machine to work, and then again might be in the POST check and may be required. If it allows no reset button that would mean you don't have the reset control. A minor inconvience by comparison. Either switch could still be the problem; but I think it will only be one. I would possibly take a picture of both switches and head to the local tech store that sells parts. The switches should not be expensive, they are for the most part simple relays with a spring release toggle built in.

The Power Switch must be used...I am not to comfortable with 'hot wiring' the power switch as a bypass.

It explains other things you described too; if the power cycles in mid POST then it can give some rather weird problems like the monitor issues you mentioned that is usually 'solved' by a clean problem free boot. If power fluxuates in operation it can have odd acting results too; that was a reason to suspect the power supply.

by slayer_

I forgot to mention, the case is from 2003, I upgraded the contents recently, but kept the old case.

by slayer_

I do want to get one of those nice big ones with the big fans and such. I certainly work my computer hard enough to deserve it.

by jdeerobins

Ever thought of putting the box against a wall so you can't walk past it from right to left? Might help you get a good nights sleep.

by slayer_

As you can see from my photos, not many walls available :) . I have a very small condo.

by i_tiberius

is there a different power outlet in your place? if not, pack it all up and take it to a friend's place and try there.

by Former member

This is very familiar here in Scandinavia. You may easily develop 100 000 Volts just by passing nearby, meaning a few meters away. I have measured, it is true. Do not use artifical fabrics like nylon ...xlon made clothes. Do not use anything plastic or woollen. Ground your equipment properly. Use shielded cables. Do not use open or windowed computer cases. It is sad but the manufacturers in Taiwan, China or California know nothing about static electricity and all the problems it causes. If they knew they would not pack hard drives into EPS which is one of the worst materials in ESD sense.

Mane

by slayer_

Well, the cables are covered in rubber... how do I ground out the tower? The face of the tower is plastic.

by peconet tietokoneet

Then why does the computer only reboot when walked passed in one direction and not the other?
If it was ESD then the computer in question would also reboot when walked by in both direstions would it not.

by varseller

Looking at the picture, he's going right to left from the cabinet and passing by the bed in a very tight space while walking on a carpet. It looks almost impossible to pass through there without his clothing rubbing against the bedspread. That's generating one heck of a static charge. Not so in the other direction.

by lani osi

I would like for you to try this: click on Start - Run (or if you have the Search feature, you can use that) - type in this word: command - and it will come up. Now right click on the command prompt; "RUN AS ADMINISTRATOR" - the Command Prompt box will pop up, and I want you to type in or just copy and paste (or cut and paste): sfc/scannow

This way your computer will automatically scan without having you to be offline or anything to do this and repair any damage and/or corrupted files and/or duplicated files and even fix registry keys or duplication or replication, et al.

Since from reading everything above; NOTE: This scan may take time the first time you run this but do not turn your computer off while it runs the first time - it will work on XP, VISTA and 7. (Everyone, if you didn't know this, you might want to make a note of that; it comes in handy! Trust me! Doing this without having to roll-back or anything is absolutely wonderful, even more so if you're on Win 7)

After the Scan is completed - the log files is found in C Drive in LOGS in CBS - you will need to run under Administrator to view it (the report that is); if everything is cleared - it will indicate that everything is cleared. If there were errors, it will indicate that it was logged --> Just so that you would know in advance.

by lani osi

The correction in my last paragraph of where the file is located:

C Drive - Windows - System32 - Logs - CBS

I apologize for this slight oversight for those who are wanting to review the entire format. And in addition; it does make it easier to read via Notepad in "Word-Wrap" format than any other options (for your info) for easier reading.

by slayer_

Today it let me walk passed it, but died when i vacuum in front of it. lost display and hung. picture went out, audio stopped, but the computer appeared to still be running, at least the lights were still on, it was just dead?

So I decided, since I am cleaning anyways, lets rip this thing out and have a look.

it is almost perfectly clean, a tiny bit of dust near the back of the case where the CPu fan blows passed.
None of the caps appear to be bulging.
Everything appears to be plugged in tight, I took out my RAM and examined it. It is 3 chips of 3 different makes, 1 of them is slower than the other two.
Its spring now, so humidity is back up.
This latest [breakdown] was with the front door closed.
No funny smells in the case.

Using a flash light, I looked into the power supply, I see nothing obvious.
The temperatures at the time of freezup (I had speedfan open checking portable drive SMART data) 45 CPU 38 GPU, HDD1 was at 25C, HDD2 was at 28C.

by peconet tietokoneet

A new motherboard plus a new graphic card would be a good investment for the future, minus one ghost. :)

by slayer_

Perhaps I should, I just dont like the current crop of boards and processors. Its impossible now to get an AMD processor with nForce chips or nVidia graphics because, obviously, AMD owns ATI. And Intel processors always seem so slow. It frequently requires 30% more speed from an Intel processor o match the real speed of an AMD processor.
I am hoping if I wait, nVidia will start making their own processors like they already do in their phones. I suspect they will be the first to come out with the consumer 500+ core processor. They already have on in their video cards...

by bzabor19

Many folks use a wireless mouse, keyboard, printer etal, which operate on infrared light (IR)

Is it possible that the IR sense is detecting a normal level of IR light, which is interrupted by your passage by the thing? Do you have wireless stuff on it, or are you using wireless connection? Many, many, many devices* operate on 900 mHz and 2.4 gHz these days (routers and more).... perhaps you're interrupting a constant signal on one of these bands, that's coming from a device in your home, or somebody else's (the condominium).

*Routers, cordless phones, remote control ANYTHING, garage door triggers, etc... Even an un-used wireless keyboard that's stored in a closet with the batteries still inside.

by slayer_

With 2 matching ones. I will see if the problem continues...

by slayer_

This actually made it worse, apparently the board doesn't like running in dual channel mode, putting back the 3 mismatched ram improved stability.

However, the restarting seems to have fixed itself.

This discussion is closed to new replies.