General discussion

Locked

Configuring 3 Cisco Routers Model 1721

By bhdrn ·
I've been asked to connect our 3 offices (local Lans) together using IP-VPN 128kbits/s service using NTU-160 modem and Cisco routers 1721 w/WIC. the provider already connected the 3 locations along with the NTU-160 w/v.35 cables. Now I need to configure the routers to comunicate togother so the 3 local Networks become as one.
The providers gave me the following configuration:

Site one Configuratin:
!
- interface Serial0/0
- encapsulation hdlc
- ip adress xx.xxx.xxx.xxx subnet xxx.xxx.xxx.xxx
!
- router bgp 64597
- neighbor xx.xxx.xxx.xxx remote-as xxxxx
- redistribute connected
- no auto-summary
!

I tried to download the Cisco Configmaker 2.6 but always giving me (* YOUR CURRENT SICURITY SETTING DO NOT ALLOW THIS FILE TO BE DOWNLOADED*)
and I'm registered member at their site.

Thank you in advance foir the help.

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by al3x In reply to Configuring 3 Cisco Route ...

when it says "your current security setting do not allow this file to be downloaded" it's probably not Cisco.

it's probably your IE browser.

try:

click "tools"
then "internet opti"on"
security" tab
then "custom level" button
scroll down and see if "file download" is disable and if it is, just re-enable it.

then download again.

Back to Networks Forum
1 total post (Page 1 of 1)  

Related Discussions

Related Forums