Discussion Locked

constant hang and swiss cheese HDD

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a friend who is having troubles with his computer.
1. the computer stats....
Windows 98 Second edition, computer is an AuthenicAMD with a Duron processor, 256 MB RAM, 65% free, 32-bit file system and is configured for optimal performance.
2. The problem ...
The computer will randomly hang, CTRL +ALT + DEL will not work when this happens. A hard shut down and scandisk upon reboot is necessary. Also, even after defragging, the drive will look like it is in desperate need of a defrag again after it crashes.

3.When it began ....
He had the computer rebuilt, new mobo, HDD and more ram. It has been sent back to the techies who did the work and they say they can't find any problem. He has had someone else look at it for him and same result, no problems could be found even after thorough testing.

Apparently after the system had been rebuilt, the techies had installe windows Millennium Edition, but a lot of his software he uses would not run in WIN ME, so they reformatted and reinstalled win98se.

Any ideas about this?

2 replies

by hinrgman

It is hard to say, there are so many things that can be the cause of hanging. Is the machine on a network? do you use it on the internet?

First thing I would do is repartition the hard disk, then reformat it and then reinstall the os of your choice, I would run it with the minimum of software applications first, if it runs ok then i would install any other applications one at a time and let each run to see if there is a problem,.

Another area i would look at is the compatibility of the existing hardware that was installed on the new MOBO. Also the memory - is it compatible is it a single module or are there 2 or more?

by atlas12

Assuming that all the new motherdoard and cpu were installed correctly, I would try to boot with one memory chip installed,then boot with the other chip.Take notice of any operational difference, lock ups etc... Could be a memory conflict issue.

This discussion is closed to new replies.