General discussion

Locked

Converting Static IP Network To Dynamic

By Feldman ·
Is there a guide available that will provide a detailed step-by-step set of instructions to convert our Network from Static IP to Dynamic?

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by cliff680 In reply to Converting Static IP Netw ...

All you really need to do is setup DHCP on your server and then go around to all of the PC's and check the box for DHCP assigned address.

Here's a command line tool you can run on the PC's.

Collapse -

by lee.newman In reply to Converting Static IP Netw ...

You need to be careful when you start converting, you'll need to take into consideration any Static NAT's you may have built in your Firewall..Check your firewall configuration carefully and plan it out. Also, if you have a Web filtering server ex(Websense) you need to consider Static IPs in it as well. Good Luck!! I'm going through the same thing right now..

Back to Networks Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums