Question

Locked

d-link usb adapter+at&t 2wire dsl

By kremit_dude ·
how do i get my d-link dwa-140 rangebooster n usb adapter to get internet from my at&t 2wire 2701hg-b dsl modem/router with wireless?

i find the network with the d-link, give the WEP and seem to connect to it, but i get no internet, no ip etc....

help! :)

Thanks,
Rick

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

You need to connect configure the setup here

by OH Smeg In reply to d-link usb adapter+at&t 2 ...

If the Modem is working and you do not need to share data between the Wireless and any Wired LAN that are in place then it's just a matter of setting the Range Extender where it is required and then connecting through that.

If the Router is not currently configured you need to configure that first with a Computer wired to it through a CAT Cable tot he Network Port on the computer.

You run the Setup Procedure on the Router as per the Instruction Manual and here you should change the Default User Name & Password to the Setup Options or just what the Router supports changing they will always be the Password but sometimes not the User Name. You should also change whatever Security Key is the Default as well and save the changes before restarting the router thought he setup procedure. Then setup the WiFi USB Dongle and make sure that you have a working Internet Connection not just a Internal LAN Connection. When this is working you setup the Range Extender where it's needed as per the Instruction Manual and then move the computer to where you want to use it.

Col

Back to Networks Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums