Discussion Locked

Data Center cable organization, need help

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I just started a Systems Administrator position and one of my first tasks is to clean up the data center. There are wires all over the place, power strips hanging by a chord mid air, and cables intertwined within one another. (I'd post pictures but I'm still new here and I didn't bring my camera. I'm not sure how they would like the new guy taking pictures in the data center on his second day anyway.) The data center has about 6 racks. 5 on the back wall with a 6th in front of the other 5. The 6th has cables going to the other 5 via a makeshit bridge across the roof of the racks. The hardware is all Dell. The switch cabling bends around to the back from the front (very sharp bends), and hangs all the way down to the floor, then back up to it's destination.

Anyway, my boss told me this is a 99.999 uptime data center, and we cannot shut it down to organize the cables. He wants me to clean it up as best I can without downtime.

I think this is impossible, but I wanted to ask to see if there is anything I can do. I guess I can buy some velcro straps and tie everything together... I wanted to see if anyone has ever done anything like this and if there is some magic solution I am overlooking.

I will try and get some pictures up for you guys soon. Please tell me what you think.

3 replies

by geobeck

...during each unscheduled downtime that by some strange management definition doesn't count against their 99.999% record.

by geraldkiii

Do you have servers in a cluster? Do you have redundant power and ethernet? If you have redundant power and ethernet then I would suggest removing all primary ethernet cables and power cables one server at a time and running them the way you would like. Once you are done with the Primary ethernet and power then work on secondary ethernet and power one server at a time. This is time consuming but this will get the rack organized with the 99% uptime required. However keep in mind when removing power and ethernet that this can cause the server to lock up and need to be rebooted. Worse case scenario the power or ethernet not fail over and you hose the system.

Personally I would suggest to your boss you have a maintenance window once a month and you shut down servers one at a time during this maintenance window to clean the racks up.

by davew

Part of your job is to Schedule downtime, I know it sucks being the new guy on the block but just present it this way..

In order to properly clean up the mess you need to schedule downtime. Make sure you give an appropriate maintenance window to complete your task in.

Unscheduled and Scheduled downtime and completely seperate items.

This discussion is closed to new replies.