Discussion Locked

dodgy wireless connections

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi all, I have a problem.

I've got 3 workstations in the flat, 1 wired PC (we'll call that A), 1 wireless PC (call that B), and 1 wireless laptop (C).

PC A is hardwired into a belkin modem/router and that transmits to 2 USB D-link receivers. When B is connected to the network and C tries to connect, both B and C get booted off and can't connect without restarting the router. PC A (me) never has any problems by the way.

Recently though, they both go through the motions of restarting the router, but then they can't connect to the internet. I've changed the network name, the channel, re-installed everything, and I can't think of anything else. Anyone have any ideas?

Thanks, Rob.

2 replies

by choppit

Two things spring to mind;

1) A static IP address conflict - Use DHCP

2) Check for updated firmware on the Belkin site.

My own experience of Belkin routers, (admittedly a few years ago) was enough to stop me ever consider buying another after I was fobbed off with multiple versions of flaky firmware by tech support. I now use Linksys.

by lwp1946

I have the company wireless reciever and then go to a D-Link wireless 4 port hub. I only use two of the connection to two computers without a hitch. My laptop I use a 40 dollar card to connect to the same wireless company and no problems there.

This discussion is closed to new replies.