12 replies
by tchanssen Accepted solution
by thedrummer2006 Accepted solution
by jamesatmaisonverre Accepted solution
by macgyver.hicks Accepted solution
by mad-h Accepted solution
by bhatnagar_nitin9 Accepted solution
I assume that you installed Linux using Linux CD, right ! That means, you did boot your computer from a Linux CD and all worked well. This clarifies that your BIOS options for booting from the IDE drives are correct viz. first one is set to boot from CD. Therefore, the only point remaining in not booting Win2K3 from the CD is that either CD is corrupt or the CD is not made as bootable. Try checking you Win2K3 CD.
If that is not the case, I suggest you to follow the install sequence which I always do when having dual boots.
1) First install Win2K3 OS on your C: drive having set it to be partitioned(C: and D:).
2) Next install Linux in a different partition and it will automatically add the LILO prompt(dual boot option) to your MBR prompting you to boot into one of the OSs.
Also, as earlier pointed out but by somebody in this thread that Win2K3 is greedy and takes all of your drive(C:), no matter you partition it into different drives; then in that case next best option to follow is: 1) Install Win2K3 and then re-partition and resize it into smaller drives(C: and D:) using Partition Magic software. It's a pretty good sofware to partition your drives in the realtime(You can actually re-partition while windows is running).
2) Next install Linux in the newly created partition using Linux CD. Offcourse you need to convert that partition into Linux File System.
by stuoutlaw1 Accepted solution
by canopic Accepted solution
I do a lot of dual booting and installations from CD/DVD drives, and have discovered a lot of anomolies ...
First, does your CD/DVD drive boot other disks such as LIVE CD and LIVE DVD linux Distros?
If your answer to this is yes, then it must surely just be your WS2003 disk(s)
Is WS2003 on CDs or DVDs?
I have seen DVD readers that will boot DVDs but not CDs. [The opposite situation would not surprise me either].
If nothing boots from this drive then:
a) Check your BIOS settings which I am sure you have done.
b) Check if your Drive is setup as a Master or a Slave. Some drives only boot if they are setup as Master.
c) Check the internet to see if there is an update for your Flash Bios.
I have other thoughts - but you should work through these ones first.
I run systems with up to 22 partitions on a drive and boot into up to 12 operating systems off a given hard disk. I have tried grub, lilo, Paragon BM, the Windows BootMgr and many others. Mostly I am back to using grub as the most convenient, especially if you change your systems a lot.
by rwe9 Accepted solution
Dear Sir:
are you trying to run linux from a CD, which in this case seems to be the easiest. Most Linux install cd disks will boot and just run linux, and not install onto your hard drive. Or will install onto a hard drive partition, if you choose this option. Why not just run from the cd, and forget the Hdrive install.
by rwe9 Accepted solution
Dear Sir:
are you trying to run linux from a CD, which in this case seems to be the easiest. Most Linux install cd disks will boot and just run linux, and not install onto your hard drive. Or will install onto a hard drive partition, if you choose this option. Why not just run from the cd, and forget the Hdrive install.
by howdougd Accepted solution
I have Ubuntu Linux on one drive and Windows on another. My Hard Drive Selector Switch determines which drive I boot, no problems. To make a switch see my diagrams at
A link to the switch is near the top on my Home Page.
by roquenton Accepted solution
NoFear, it sounds like Howdougd's drive selector switch is the magic bullet and it is. But there is a little known multi-boot program which hasn't been mentioned yet called "BootIt New Generation" which can be downloaded from their web site at: http://www.terabyteunlimited.com. It works like this: BootIt NG installs its own MBR and what it calls an Extended MBR as well as its own small partition onto your drive which will allow you to boot into up to 256 separate OSes. The only requirement that I suggest is this: Make sure that your distribution of Linux will at some point during the installation process prompt you as to where you would like to install the boot loader. You would normally have to follow the "Expert" (as in Suse linux) or "Custom" (as with RedHat) installation paths in order to do this and you would select /dev/hda1 (the /boot partition in RedHat) as opposed
to /dev/hda which is the MBR. If your distro doesn't allow you to do this then it's probably not worth fooling with. But if it does then just download the evaluation version and give it a try. What have you got to lose?
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending