4 replies
by wcp
I assume the 80GB hard drive (HD) is new.
To make it simple, disconnect the 30GB HD.
Partition the 80GB HD with 60GB and 20GB, and format them with NTFS. To do these, connect the HD to a computer with Win2K or WinXP. Install Win2K Server in 20GB partition. The 60GB partition will be the System partition where boot files (boot.ini, ntldr, and ntdetect.dos) reside. Then install Win2K3 Server in the 60GB partition.
If you cannot partition and format the HD before installing Win2K Server, you need to create the partitions while installing the Win2K Server and you MUST install it in the 60GB partition first. Then install it again in the 20GB partition. Now you have two Win2K Servers, one in each partition. Boot to the Win2K Server in the 20GB partition and delete folders Documents and Settings, Program Files, and Winnt in the 60GB partition. Edit boot.ini and delete the 60GB startup line. Install Win2k3 in the 60GB partition.
by wcp
I also assumed the 60GB is the first partition and the 20GB the second.
If this is not the case, just install Win2K Server first in the first partition (20GB) and then Win2K3 in the second partition (60GB). The Windows will set automatically for dual boot.
by xmutant5
by xmutant5
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending