Discussion Locked

Fan kickin on the system reboots

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a newer compaq EVO D310M. Not even a year old. Fresh XP-pro just re-installed, while working the fan will kick on very loud and fast then if I keep working it will reboot automatically or crash where the power light is on and the screen is black and everything is froze. At this point I have to press the power button to get it back on. I know the it is set to reboot during system failure. What is classified as a system failure and does anyone have ideas on troubleshooting.(processor getting to hot maybe)

9 replies

by pctech26

Is your machine still under warranty? If so, call compaq and have them help you with your issue because if they can't fix it hopefully they will replace it.

What do you use your computer for? Do you play games or use it to search the web and write documents?

The CPU may be overheating because of programs running in the background that you are not aware of, or you are having some hardware issues that is not cooling down your CPU. I also suggest opening up the box, and blowing out the dust from inside the machine. Make sure there is no dust around the CPU because it will work as an insulation which will help it to heat up.

by rg11

It is used for accessing databases over a network, running reports(access), internet, office. It seems when the processor gets a big load then the fan kicks on and then the system would shut down. I reseated the processor and its not shutting downanymore but the fan still comes on often when the processor is working hard where it wasnt doing this a few weeks ago....

by cg it

check your event viewer in your control panel, system & performance, administrative tools and see if there are any system critical errors or in application critical errors. To stop XP from rebooting on critical errors, click control panel, system & performance, system, start up and recovery tab. cleck the reboot on critical error.

if you have a lot of info in the event viewer and can't make heads or tails of what could be causing the critical error, clear the events in the event viewer by right clicking a category in the left pane, choose clear all events without saving. Next step work the computer until it does it critical stop. The view the events in the event viewer. This might shed some light on what's going on.

narrowing down what's going to cause a critical error system reboot is just a process of elimination. Gotta start somewhere and the event viewer is a good place to start before thinking hardware malfunction. XP sometimes doesn't like drivers or software.....is yourXP Pro to Service Pak 1 and all other updates??? If not try appling the service paks and updates.

by rg11

I have SP 1. Event viewer doesnt help. nothing gets logged the is critical when the system would go down...

by paulp

I just had the exact same problem with an EVO 510. I discovered there was only one bracket holding down the processor heatsink instead of two. I just ordered the part this morning so I won't know until Monday if it actually solves my problem. I suspect it will.

by thechas

As far as heat issue go, here are my tests:

Is the base of the heatsink warm / hot?
If not, the heatsink is not making proper contact with the CPU.
You either need a new heatsink, new clips, or thermal paste between the CPU and the heatsink.Is the top of the heatsink hot?
If so, the fan is either not doing a good job, or the heatsink is too small for your needs.
A new heatsink and fan is the best fix.

Since the problem just started, I would check the CPU settings in BIOS setup.Make sure that all clock and voltage settings are correct.

Chas

by steven lynas

Hi, I work for Compaq! Give us a call (08705592000) If your machine is still in it's first year, you'll be entitled to an onsite repair to replace the mainboard. Which it sounds like it is. Paste your serial number here, likely beginning with 6S2 and I'll check your warranty for you and tell you what you're entiled to!

Cheers mate

This discussion is closed to new replies.