Question Locked

File sharing works via ethernet cable connection but not wireless

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have home network of 2, and sometimes 3 computers. All work great, connect to the internet, etc. I share the printer and files. However, if I connect to the network with my laptop via wireless, I can no longer access the shared printer or files. I get messages like the network location is not accessible, check permissions, etc. I've confirmed that my wireless is connected to my own router and not someone else's. All computers are on the same workgroup, etc. But I don't understand why I can't share files between a wired pc and a wireless one. Please help.

9 replies

by mamies

Check the firewall settings of the laptop to see whether it will allow you to connect to the Wireless LAN. Its how I solved this problem for myself

by dana803

went to check my firewall, but it's off, so nothing there

by mamies

Look for a setting within the router, It may have something to do with wireless settings, Also look to see whether the computer with the shared hard disk has blocked the laptop with its firewall

by dana803

I don't have problems connecting to the internet. only file sharing while wireless

by rob miners

the other PC's in Network Neighbourhood.

Is the Linksys in Mixed mode.

Check that File and Print Sharing is enabled on the PC's and that the Share has the User listed with Full Control. You should then be able to access this Share from another PC using the Account credentials.

Check the IP settings on the PC's by going to a Command Prompt and type in ipconfig /all

Compare it to the other PC's.

by dana803

Yes, the linksys is in mixed mode. As far as sharing and credentials, that's all fine, and I can see the other computers on the network. IP settings are consistent. Same subnet, etc. I can access whatever I want when I'm plugged in via ethernet cable. So, all the sharing is fine when I can access it at all. However, as soon as I connect to my network wirelessly with the laptop, I can still see the other computer in network neighborhood, but i get an error than it's not accessible when i double click it. It's like there is something about a wireless connection that won't allow me to access shares on my other computers which are still connected via an ethernet cable.

by rob miners

Check these settings on the 3 PC's and if the Data value is a 1 change it to a 0.

When you double click on the computer (in My Network Places/Workgroup) that you are trying to access the shared files from you may get this message:

You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions Access Denied

If you see this message the following should be done on the computer containing the shared files:

Click Start, Run and type regedt32 and press Enter.

Navigate to the following key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa

In the right hand pane double click on ?restrictanonymous? and change the Value Data from 1 to 0

Exit regedt32 and reboot the PC.

http://support.microsoft.com/?kbid=913628

< Typo >

This discussion is closed to new replies.