Discussion Locked

Finding PC with 3COM MAC on network

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an IP address conflict on my network.
I know the 3COM MAC address and IP address but
can not find the PC with the 3COM NIC installed.
PING and MEGAPING will not report a Host name.
The MAC is 3COM Europe:22:FF:F8 / 08004E22FFF8
I'm pretty sure this is a 3COM NIC.

Any Ideas?

Thanks

9 replies

by jschein

goto the command line and type: c:\>ping -a xxx.xxx.xxx.xxx

find that pc, turn it off... goto another pc and do the same.

If you have properly named your pc's, you will know what it's location is.

You didn't state the OS either though... If 2000 domain, you can right click my computer, goto manage, right click computer management local, connect to another pc... put it's network i.p. in and find out who the logged on user is...

Or you can type this from the run command..

(x being a drive not in use on your pc)
net use x: \\xxx.xxx.xxx.xxx\c$

to connect to that pc's c drive and see what files / users / settings are there and you can identify it...

by jkk

Windows 2000 PRO.
Network is peer-to-peer with WIN 2000 and Win9x
systems.

by omie

here is the way you could do ...
Go to command prompt and then type this command

nbtstat -a

by omie

here is the way you could do ...
Go to command prompt and then type this command

nbtstat -a

This discussion is closed to new replies.