Discussion Locked

Firewall access

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have just been asked to add 2 network printers and a PC to an existing network. I have completed all the cabling and the tests are ok. Problem - I am using Windows Server 2003 standard edition, I can't see the the three new machines. The network kit comprise of a SonicWall TZ70 - Firewall, Nortel Baystack 420-24T Switch and a A BT ADSL Router. The original set up had 12 nodes all working ok. The firewall is between the router and the server. I can't see any firewall software on the server for configurations. How do I gain access to the additional 3 ports on the switch?

4 replies

by 3xp3rt

You must add all three new machines to domain. So go to server managemen, chose Client computers add the new computer, after this chose Printers and add the new printers. After this you can see those.

by ricardo_snehpets

I have added the devices to active directory and install the printer software on the server but they are still not showing.

by sgt_shultz

um, you want to know how to get access the the 3 ports on the switch? you mean, turn off the firewall? hmmm. you are saying, no ping? if you can ping, then to set up your printers in active directory you have one more step: go to Printers on the server and right click an installed printer. pick Sharing then pick Share this printer. then u will see the checkbox for 'Show in Directory' or something thereabouts. which you want have checked.
you may want to put the user account you are testing with in the Print Operators and Managers group also so that you have more rights than the default...be sure to test with ordinary account too after it is all working
if this brings no joy, reinstall the printers on each workstation (using an domain account with privleges to install devices, not a local machine account)
if still no joy, check out how to setup and troubleshoot printers in active directory at support.microsoft.com

by cg it

humm did you join the PC to the domain? just adding to Active Directory isn't joining the PC to the domain. It just creates a computer account with the PC name.

It the Baystack VLAN? if the Baystack is a plain ole 24 port switch, you should be able to just plug in the printers and PC to an open port. Then you join the PC to the domain and the printers you setup as Network print devices and list them in Active Directory as a shared resource. [have the drivers in a shared network folder so the drivers will install automatically when users install the printer.

This discussion is closed to new replies.