Windows may be hanging because your monitor is different than the monitor that you used to have, and it is having problems dealing with the differences.
In safe mode, right click on a blank area of the desktop (no icons)
Select properties.
Click on the settings tab.
Click on the advanced button.
Click on the monitor tab or button.
Click on show all devices.
Either select the mfg and model of the monitor you are using, or select tha nearest match from standard monitor types.
Click on Okay and apply to exit display settings.
As to the CMOS battery and settings.
It is possible that the long period of time without power applied to the PC ran down the CMOS battery.
When this happens, the BIOS settings stored in the CMOS memory sometimes get corrupted.
The best way to eliminate this as a problem, is to replace the battery, and follow the reset proceedure for your system.
(Usually setting a jumper, turning on the system, turn off the system, reset the jumper, restart the system)
Then, enter Setup when you restart the system, and adjust the BIOS settings as needed.
Date and time,
Drives (floppy, Hard drive and CD-ROM)
Ports (USB, COMM, you usually need to set the parallel port to EPP/ECP mode)
There are a couple of articles in the archives at Tech Republic on adjusting your BIOS settings.
Just search the articles on bios
To get rid of MS-DOS compatability mode, one way is to re-install the IDE bus driver for the chipset on the motherboard.
Alternately,sometimes it works to just delete all drive controllers from device manager, and allow Windows to re-install them when you re-boot.
Chas