Question Locked

From Wireless PC a Cabled switch?

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I hope somebody can help me with my problem.

I have wireless router (2wire) and about 30 feet away in another room my desktop pc has a linksys usb wireless adapter, everything works fine.

Can i connect an 8 port switch (netgear) to my desktop pc and from that switch connect via ethernet cable other desktops in the same room??

Dont want to use a 30 feet cable through the house (and my wife wont like it)

Thanks!!!

8 replies

by thechas

You should just be able to enable Internet Connection Sharing on the desktop and go from there.

You may need to set the wireless USB adapter as your default connection.

Depending on the class and speed of the wireless connection, you may experience a slow connection to the other PCs.

Chas

by jgirizarry

The switch should be able to logically let pass the router's IP info to the other desktops, since the switch is not connected to the 2wire, the switch alone won't do the job. ICS is slow, I don't recommend it.

You may try Power over ethernet, using your existing power outlets to connect ethernet devices. Check the link below.

http://www.google.com/products/catalog?q=ethernet+power&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&cid=8230972926509792890&ei=Hs1zSs_CFIuntgf98vGWCQ&sa=X&oi=product_catalog_result&ct=result&resnum=4#ps-sellers

Cheers

by sirkozz

Power over ethernet is 802.3a/f and is used to remotely power devices, access points, cameras ect.
The issue with homeplug is security, nothing like sharing your network for a couple of city blocks???

by thechas

You have your terms crossed.

Power over Ethernet is a method for powering devices from an Ethernet jack using existing wiring.

What you are recommending is Networking over power lines.

The basic technology behind this dates back to the 1970's when several companies offered home stereo speakers that could be plugged in to just a wall outlet. Or even older to wireless intercoms that did not use antennas.

Prior to wireless, networking over power line was a growing technology.

You can find out more about it here:

http://www.homepna.org/

Chas

by jgirizarry

Thank you guys...

I have heard about this technology, I have never used it, but you are right, security is an issue.

For the guy with the main post, do your homework about this technology to see if there is security option on this.

The best and most secure way is to run a CAT5 cable to that room. Since you are in Mexico, your home should be concrete. That is a difficult task but not impossible.

by aaronbav

No need for ICS. You can "bond" the two connections (the USB adapter and the PC's wired NIC) into a single connection by "bridging" the two connections in the XP [edit: assumed XP but also works for Vista/Win7] network connections. Once the connection are bridged any additional machines plugged into the switch will pull their IP addresses from your wireless router via the bridged machines Wireless adapter. Of course the "bridge" machine will have to be kept on (just like in ICS) for the other machines to be able to connect.

I do this all the time on my network - the main advantage of this is that all the PC's remain on the same subnet (with ICS you would end up with two seperate sub-nets and the machines would typically not be able to communicate for file/print sharing)

Aaron

This discussion is closed to new replies.