7 replies
by sgt_shultz
well, that certainly would be weird to have both monitors go south but have you tried a (the) monitor(s) on another computer just to make sure?
to answer your question, i have never heard of a mb or slot failing in that way...
by anigwa
by moodye
by anigwa
by thechas
I suspect the AGP slot, or that the cards do not seat fully.
With the video card removed, inspect the connector with strong light, and magnification.
I suspect that 1 or more pins are either physically damaged, or corroded.
I do NOT suggesttrying to change the socket.
Most motherboards have 4 or more layers of circuitry.
It takes special equipment, and skills to remove parts from the board without damaging the board.
Try a PCI video card, and see if the problem goes away.
It is also possible that the card is not seating fully into the socket.
The easiest way to check this, is to remove the bracket from the card, and see if the card seats further into the socket.
It only takes 0.010" of being out of the socket to cause problems for AGP cards.
While unlikely, it is possible that the PCI to AGP bridge has failed.
Either way, you will need a new motherboard, or switch to PCI video.
Chas
by anigwa
by anigwa
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending