hard drive/fdisk

try deleting both partitions, or even worse, low level formatiing the drive

Little longer but good answer:

1- Boot from a floppy.
2- run fdisk to delete all partitions.
3- after deleting the partitions, reboot from the floppy.
4- run in the DOS command line: fdisk /mbr two times.
5- reboot
6- check with fdisk /status if there is still a partition in there.

Please be more specific as to waht error does your fdisk program gives to you...

Bye,
Erick.

here is some idea,delete the partition and create new one.create new primary parition and extended partition.after you create new partition shutdown your system and restart again to take effect.Then choose option no 4 to check the partition.

Do a low level format and then run fdisk again. That should take care of it.

U can try this..
Whether u have old good DOS 6.31 4 set of setup floppy.. Boot from 1st Floppy and see the magic

This question was auto closed due to inactivity