Discussion Locked

Help in Setting up an onboard ethernet f

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Ived tried everything possible to setup the onboard ethernet for my dell gx240, 1.8 gz. The operating system is NT-04. Ive downloaded the latest driver from the website and it does not work.I also had tried the drivers on the cd. The nic card is enabled in the CMOS. Im stumped. Is there a known bug with the Dell GX240??

3 replies

by rgrowcock

What kind of error messages are you getting? I have a 1.7Ghz with 2000 and have had no problems with it.

Can you Ping the interface? 127.0.0.1? Or is the system just not recognizing it? It should be listed as a 3Com Integrated Fast Ethernet Controller (3C905C-TX Compatible). Dell lists the lastest driver as the WHQL A-rev release of 5.41a with a date of 10/31/01.

I would double and triple check your settings, DHCP v. Static, and go from there. Also, you system should still be underwarranty, so call Dell. I've found that early in the morning, 7-8 EST, and later in the evening, 8-9 PM EST, is the best time to call the support center.

If you don't want to go through this, post your error messages to get a more complete answer and possible solution. Roger

by jamyot

turns out it was a problem with the settings on the Ethernet Card. thanks :)

This discussion is closed to new replies.