Question

Locked

help Requierd

By chetan_expert ·
currently i using 64 Kbps lines on my 4 1800 & 1 2800 series router but now i want to update the line with 2 Mbps from my lease line provider i get lease line & i get loop ok too but whener i connect the modem to rouet i get destination host unrechable
any one suggest what tro do
is it neccesary to set bandwidth
currently Internet address is 10.64.85.1/28
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, this is my current config
i want to configure this for 2 MBPs how can i configure it

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Contact your lease line company

by The 'G-Man.' In reply to help Requierd

They set the speeds of the connection, not you.

Depending on what bearer you have installed at present it may require a visit from them to upgrade your connection.

Collapse -

Contact your lease line company

by chetan_expert In reply to Contact your lease line c ...

Thanks sir
but they have alrady set the speed & they are getting loop till their modems & they say the line is ok
but when i connect the modems to routers at both end i gett destination host unrechable

Collapse -

Bring your "MTU 1500" down to "MTU 1499 or 1480.

And try again..

Please post back if you have any more problems or questions.

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums