General discussion

Locked

home - office pc in netmeeting

By dakid ·
Hi!

I want to connect home to office pc thru netmeeting. I can connect from office to home thru netmeeting easily. Umm.. what can I do get it connected?
office pc is on a hub w/ about 15 pc's. this is my office pc info
ip address: 192.168.xx.xx
subnet: 255.255.255.0
default gateway: 192.168.xx.xxx

dns: xxx.x.xxx.xx
hehe hope x's are right! I don't know much bout networking. I went to myipaddress.com for ip's but i notice at office every pc has same ip. that's where i'm lost. well any help would be appreciated
Thanx in advance :)

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by carlos.nino In reply to home - office pc in netme ...

The IP address you see at myipaddress.com is your office's real IP address to the internet. You probably will not be able to connect from your home to your office because that is possibility is blocked by your office router/hub/firewall.

Collapse -

by -Q-240248 In reply to home - office pc in netme ...

Can't do dynamic NAT and Netmeeting. IOW, you cannot use a 192.168.x.x addres, it must be public. Since you say you don't know much about networking, you might as well forget about it.
: (
Here is a link that describes netmeeting through a firewall and what ports you may possible be able to forward through NAT statically within the DSL/cable modem:
http://support.microsoft.com/default.aspx?scid=kb;EN-GB;q158623

Collapse -

by dakid In reply to home - office pc in netme ...

This question was closed by the author

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums