Networks

Ask something
Discussion Locked

How about a step by step that works!

0 helpful
3 replies

by bologna1

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have been all over the internet trying to find a step by step for setting up a VPN using RRAS in Server 2003. I have found some that are "step by step" but they do not work. We need a step by step that addresses the settings on the server AND client (Windows XP Pro SP2) side. We could even leave the router settings out of it.Lets just assume no router. Just PC and Server configurations that work. Anyone up for the challenge?

3 replies

by sgt_shultz

presumably, you already saw this but just in case:
How To Install and Configure a Virtual Private Network Server in Windows Server 2003
View products that this article applies to.
Article ID : 323441
Last Review : July 15, 2004
Revision : 1.0
This article was previously published under Q323441
For a Microsoft Windows XP version of this article, see 314076.

bet you could get free email support from microsoft on this
they are gonna want to know what you tried and what exactly 'did not work' . no points please. good luck
ps this is easy. something fundemental is going wrong. we are up for the challenge, we gotta get YOU up for it sounds like

by bologna1

The link helped, but 90% of the article does not pertain to what we are doing. All we are trying to do is configure the server so that it will accept PPTP connection requests. No certificates, authentication (besides passwords), encryption, or anything like that. I guess I am trying to find a configuration that will work, even if it is completely non-secure. Once we can establish a connection, we can secure it from there.... thanks for the help

This discussion is closed to new replies.