Desktop

Ask something
Discussion Locked

How can I fix an LPT1 Problem

0 helpful
7 replies

by roseeone

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have installed a Lexmark Printer and loaded the software. But, what I get now is the infamous "Can't Locate the Printer" message. I have looked in win.ini (Ports,Devices & PrinterPorts) and everything seems to be in order.What shows up in the lexmark printer dialoge box is: LPT1:(Canon Bubble Jet). How do I get rid of that so I can get my new printer to work.

7 replies

by cg it

What shows in the control panel, printers object? the Canon printer? If so, you can use device manager to uninstall your canon printer. you can also check the status of LPT1 in device manager to determine if the printer port has a problem/conflict. Device manager is accessed by start, settings, control panel, system, device manager. You can remove the offensive Canon printer and then expand ports to check on the ECP printer port.

by qballrail

There may be several issues here.

1) The LPT1 port may be unplugged from the motherboard - open your case and check status of the plug (unless it's integrated). Reseat the plugin to reestablish connection. If this interface is faulty (rare), youmay need to go to a computer warehouse and find one they usually have in surplus, or purchase a parallel port adapter. Install in an available expansion slot.

2) The LPT1 port may not be recognized by Windows (check your Device Manager from the System Properties menu and select Ports). You may need to run the Add New Hardware Wizard to find it. Select the ports option.

3) The interface cable between the printer and computer may be bad/not connected properly. Check both ends and reseat. If no results, replace with new or known good cable.

4) Check your BIOS setup program under Integrated peripherals for LPT (Parallel Ports) and make sure you have it enabled and set to the correct emulation. ECC is most common.

Hope this helps!! Good luck! :)

jdhNV

This discussion is closed to new replies.