Question Locked

how do I check my server is properly setup as dhcp server?

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

trying to fix network problem, thanks for any help

this is a followup to my earlier question re: ISP, server, router

3 replies

by rob miners

DHCP server role: Configuring a DHCP server

http://technet.microsoft.com/en-us/library/cc756865.aspx

When it is setup properly and your workstation is set to obtain an IP Address Automatically.

Open a Command Prompt on the workstation and type in ipconfig /all

This will give you a list of your connections.

Example:

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : minero.local

Description . . . . . . . . . . . : Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller

Physical Address. . . . . . . . . : 00-16-E6-60-44-DC

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 10.20.20.22

Subnet Mask . . . . . . . . . . . : 255.255.254.0

Default Gateway . . . . . . . . . : 10.20.21.254

DHCP Server . . . . . . . . . . . : 10.20.20.1

DNS Servers . . . . . . . . . . . : 10.20.20.1

Primary WINS Server . . . . . . . : 10.20.20.1

Lease Obtained. . . . . . . . . . : Saturday, 9 August 2008 4:33:45 AM

Lease Expires . . . . . . . . . . : Sunday, 17 August 2008 4:33:45 AM

by triathlete1981

what is running your dhcp. linux? windows? some linksys router?

on a workstation that's supposed to get an address, run an ipconfig /all in command prompt (if running windows) and see what shows up as dhcp. or, run an ipconfig /release and then ipconfig /renew. if you get an address, you're dhcp is okay.

This discussion is closed to new replies.