11 replies
by alpha-male
Usually this sort of thing can be disabled in the BIOS though some motherboards will provide a jumper. Your motherboard manual should have all the details necessary. If you don't have the manual, you may need to find out the make and model (usually printer on the board) and then find it online.
Good luck!
by imgreat76
by lizzy
You can also disable it in the system configuration if you need to install, say, a dual channel PCI sound card. Go to Start, Settings, Control Panel and double click on System. Under the device manager on the 2nd tab, explode or expand the plus sign next to audio devices. You will see probably 3 things there, two being your integrated sound card that you can double click and choose disable in this profile and the other item being the wave device for your voice modem--leave this item alone. Reboot, and you should be good to go.
Best wishes.
by imgreat76
In principle answer 2 should work. There may be more. I had the same problem with a Compaq. There you have a special partition used by Compaq for setup where you may have to disable it as well. This is depending on your OS. WinNT may use these data while Win98 wants to re-invent the wheel. Another issue may be that you have to do it a few times. If there might be a problem with the registry and Windows uses a previous copy the problem is there again. I remember fighting quite a lot on that system [being a double boot for WinNT and Windows98]. However, now it works fine.
Good luck.
by imgreat76
by thechas
Start by removing any software related to the on-board sound in add/remove programs.
(This is to prevent conflicts when you install the new sound card)
Then remove the on-board sound and related devices from device manager.
Shut down instead ofreboot.
Set the jumpers if needed to disable the on-board sound.
Start-up and enter BIOS settings.
The switches to disable on-board sound are usually in the on-board periphials section, but may be elseware.
Set ALL devices related to the soundto disable.
Save settings and exit setup.
Allow windows to boot up.
Shut down, and install the new sound card.
You should now be up and running.
If you need to find specific details for your motherboard, you can identify the mfg from the links at www.motherboards.org
or www.wimsbios.com
Chas
by imgreat76
by fred king
Find Integrated periphals in the BIOS.
One of the option is to disable onboard sound.
Remember to uninstall the old drivers before you install the new ones.
HTH
Fred Davies
by imgreat76
by imgreat76
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending