Question Locked

How to Install Sony VAIO Media Server in a non Sony PC

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I got a Sony Vaio Media Receiver witch is only compatible with Sony VAIO Media Server to stream media to the TV...
It is possible to install Sony VAIO Media Server in a non Sony PC?
There is a way to make understand the application instaler that non Sony PC in question is a Sony PC?; Registry?; BIOS?

6 replies

by ic-it

This will help you install the applications either from the Sony Recovery Partition or from the Recovery CD/DVDs.

Edited - I think you will also need the GigaPockets application.

by gavin

I tried using kcap to install applications from the sony revocery dvd, but it is not working.

by meinekatze

here is a "Zitat" from the englisch text i found:

If you have not done it yet, create recovery DVDs using the VAIO recovery tool from the start menu. You will end up with one System restore and one Applications restore DVD.

TURN OFF AUTORUN on the DVD-Drive and insert System Restore DVD in Windows. You well see a VAIO Applications Folder on the DVD which contains all drivers, Sony Utilities and even Windows Hotfixes for your VAIO (no need to use SONY site at all to get them). Just copy the VAIO Applications folder to your PC after Clean Install and use it for installing drivers, utilities etc...

Now the Pre-installed applications:
Insert the second DVD (Applications Restore).
This one has all the pre-installed applications but you cannot select any of them because they are all packed with SONY proprietary packer and there's apparently no mean to selectively install any of them. right? wrong ;o)

Copy the entire Restore Applications DVD on your hard drive
Download this file (kcap.exe) at:
http://www.math.utexas.edu/users/rogoyski/work/tr5ap_winxp/kcap.exe

,this file will expand any xxxx.pac file. You will then get the application setup for each and also get user name (generally Sony Customer if not for all of them) and serial number for each that requires one (read inst.wsf in Notepad (in the BAT folder of the expanded xxx.pac file)).

Do not drag drop on kcap as this will not do anything but use the command window (Start, Run, type CMD, enter) and type:
[path to kpac.exe] kpac.exe [path to the pac file] xxxx.pac [destination of the pac file].
Important: The destination Folder MUST be created before!!!

example: d:\kcap.exe d:\VAIO_Save\APR\SP-010849-00.pac d:\VAIO_Extract

(In this example the DVD content was copied to d:\VAIO_Save, kpac.exe is on d:\, the pac file SP-010849-00.pac is located in VAIO_Save\APR folder and the expanded pac.file will be extracted in d:\VAIO_Extract (you may want to create this folder first).

The kcap utility will create a folder with the pac file name with all files in it. Use setup to install the application (read inst.wsf (or other available files) from the BAT folder of each extracted pac file in notepad to know what application it is if it's not obvious and to get username and serial number when one is required).

Once you have extracted all pac files, it would certainly be a good idea to burn all of them to DVD. At the end of the day you should end up with one OEM retail XP CD accepting you Windows Licence number (using instructions from previous post (thanks Akash84) )and several CDs or DVDs with all pre-installed sofware. Thanks SONY for not providing them in the first place (but at least we now know how to get around).

This is, what i did (Ftmmsch alias Lothar)
1.)
at first, disable AUTORUN in the drive, you put the VAIO-Recovery 2 (Applikations)

2.) create two folders in drive "D"
(par example: VAIO1 and VAIO2)

3.) you copie Recovery-CD 2 (Applikations) to VAIO1

4.) because, there are a lot of "sony.pac" folders on the Recovery CD2, i created at first such as folders in VAIO2 as there are
"sony.pac" folders on the Recovery CD.

The first is just named "sony.pac" the second is: "sony2.pac" and more.

Any way: it don't has to be "sony.pac" - it's enough, to create just: 1 2 3 4 5
:-) (bla bla bla:-)

4.) the destination for "kcap.exe" is in this case defenitly drive "d"
just copie kcap.exe to drive "D" ! not in a folder ore somewhere else! - just to drive "D"

here is the link again:
http://www.math.utexas.edu/users/rogoyski/work/tr5ap_winxp/kcap.exe

Than click on "Start" then "Run", type "CMD" and hit enter.
in my case i did (if i remember it well)
: after start - run cmd -
i did it like this:
d:\kcap.exe -space- d:\VAIO1\APR\Sony.pac -space- d:\VAIO2
And than "ENTER"

i do not remember exactly, but i think it was with "APR" between it. It doesn't matter because you can't demage something with it.

what i recognised is:
when i hit ENTER and even if it works, nothing changed..
But when you look in the Taskmanager, you wil see, that kcap.exe is running !
So ! don't do anything and wait !
After it (when you did right) you wil see all the folders from "sony.pac" in VAIO2

i don't no annother way -

i did NOT close ! "RUN" ! i leave it like it is, because i need it for the other folders.

If you chose for the next folder "sony2.pac" - you can do it a simple way and you can't do it wrong, because you just have to type: d - that's all - the rest you wil do with the Button to move to the right side on your tastatur (sorry-i am a german:-) i meen_ the button with the
arrow "->" than it goes automaticly because "run" remember what you typed before !
You only have to watch for the right number.
Example: you type "d" than you go on with the button -> until you reech the
place: "sony" than you have to type "2" - and you go on. The rest, "RUN" remembers if you go on with the button ->

So you only have to type "d" go on with the button -> and change after "sony" the number of the folder and you go.
if you type to the end, just hit "enter"
and you go on again.
Note ! : after every move to "VAIO2"
i moved the files/folders to the folder i created. after "sony.pac" i moved them to my folder 1 after "sony2.pac" to folder 2 and so on. Than i had the folder "VAIO2" clear every time and i could move them to the place they belong (). Because there are many folders after this action :-)

may be it goes like:
d:\kcap.exe -space- d:\VAIO1\APR\Sony.pac -space d:\VAIO2\"my folder"

i don't no and i had no feeling for experiments :-)

NOTE ! remember the "Space" AFTER ! exe and the space BETWEEN Sony.pac and the last "d" otherwise it wil not run !

I hope that i could help you with it, because this "Thema" (Recovery) is very very desasterous :-)

greatings from H?rth/Cologne/Germany

Lothar Peters alias "Ftmmsch"

E-Mail: meineKatze@web.de

PS. in most of the folders you can't imaging, what applikation it is. If it is so - than go/look in the right folder "BIN"
There you dubble klick on: Konfiguration.ini
(Not on exe :-)

So - i have to go in bed.... good nigth

by wim.mueller

Hello this instruction is cool but my whole recovery CD/DVD is not working and the HArddrive is formated. can soemone help me with this media server file ? THanks

by emc2guru

Most likely you need to update your MBR or if you installed a new hard drive many partition tools will hide the first file system created on an old board. If the new hard disk holds the 0 position it can be set as active or inactive but Sony's recovery utilities don't support reverse mirrors. As a recovery utility not an installer, the first file system will always be detected, with no reverse procedures and a hidden partition it will continue to unload then you got your blue screen, memory dump. The file system must be deleted and reformatted then install.

This discussion is closed to new replies.