Question

  • Creator
    Topic
  • #2268185

    HP LaserJet4V cannot get to print

    Locked

    by bgsuisu5397 ·

    At wits end!
    Have LaserJet4V that works with Mac OsX, but will not work with Pc (xp) mac prints with airport and linksys wired or wireless. Pc will not print through local serial printer port or wired ethernet. have tried new tcp settings, router configs etc. Is it a printer setting through its control panel that will not allow the PC to print?
    Any help would be great!
    Mike

All Answers

  • Author
    Replies
    • #2515800

      Clarifications

      by bgsuisu5397 ·

      In reply to HP LaserJet4V cannot get to print

      Clarifications

    • #2515759

      Need more info about your network to help

      by why me worry? ·

      In reply to HP LaserJet4V cannot get to print

      How is your printer connected to the rest of the LAN?

      Does the printer have an internal jet direct card?

      What protocols are enabled/disabled on the printer jet direct?

      have you tried pinging the IP address of the jet direct from your PC?

      Does the PC have a centronics connector? If so, connect a parallel-centronics cable to the printer and the other end to your PC and see if you can do a direct print

      • #2514912

        answers to your questions

        by bgsuisu5397 ·

        In reply to Need more info about your network to help

        How is your printer connected to the rest of the LAN?
        through wired linksys router
        ethernet

        Does the printer have an internal jet direct card?
        yes

        What protocols are enabled/disabled on the printer jet direct?
        jetdirect J2552A
        Lan HW 006080530403
        port select 10base t

        have you tried pinging the IP address of the jet direct from your PC?
        not sure how

        Does the PC have a centronics connector? If so, connect a parallel-centronics cable to the printer and the other end to your PC and see if you can do a direct print
        Tried won’t work

Viewing 1 reply thread