Discussion Locked

I am stuck in 16 bit color

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am stuck in 16 bit color and when I go to change to 256 colors there isn't enough room to find the ok button to click. Any help will be graetly appreciated. Please send reply to agphilbrick@hotmail.com as I can't get into my peoplepc.com mail set at 16 bit.
Al

13 replies

by dklippert

Right click the desktop. Type r
Use Alt+Tab 5 times.
Arrow up once.
You should now be in 256 color
Hit the Enter key

by parvus1202

You might have lost your graphics card driver. Install the driver and then you can change it.

by martin.hoer

Your video driver maybe corrupted. Go to video card manufacturers site and download driver. Install per manufacturer instructions. This should bring everything back, if not you may have a bad video card, in which casse you'll have to replace it.

Good luck

Martin

by maggot

Depending on your monitor size, try changing your
resolution to 800x600 or higher, then change your
color depth. If your have problems then you might
have a driver issue or card problem.
Good luck!!

by erekose mcne

You have not stated your OS or monitor size which are very important. Let's just assume you are not using a 14" VGA monitor and you are capable of running at this resolution. Let's also work under the premise that you're running 95/98/me. If youy did not add any new hardware recently to change anything, you should be able to boot to safe mode
(Press and hold F8 key while booting and choose option from menu). From there you can boot your machine. Once you have done that, go to the control paneland click on the system icon. Choose the devices tab when it opens and then click on the displau adapter icon in the window. How many are listed? Do you have more than one? That could be a problem. Make a note of the correct one for your machine. Ifyou know which one is correct for your machine, you can download the correct one from your video card vendor's site, driverguide.com, or PC vendor. You might then want to remove all the video adapter drivers and let the PC reboot and redetect the newly downloaded drivers. You may have to specify the path to where the files were downloaded if an installer was not included and just the .inf files. After that is completed, 1 more reboot and you should be able to get any resolution previously desired possible by your machine.

by jacook

Try this site for just about any driver you could need;
http://www.driversguide.com/

Logon ID: drivers
Password: all

Or join for free and receive news letter from them.
I have used this site for the past three years and have gotten faster results than thre OEM sites
Luck to you

This discussion is closed to new replies.