Question Locked

Intel DP35DP drivers for Server 2003

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a client running a server that was purchased from a Pc company containing an Intel DP35DP motherboard. I used the provided MB disk when reinstalling Windows Server 2003 which was previously installed for the motherboard drivers and all failed to install except for 1. I was able to manually point to drivers and get the video, audio, and network drivers installed. The PCI Simple Communications controller was unable to locate a driver. I read that this DP35DP desktop motherboard doesn't support windows server 2003 drivers? Is this true? If not I need a driver for my PCI simple controller (32 Bit).

Thanks all...

4 replies

by seanferd

Have you tried the XP driver?

Part of the problem will always be that Server OS don't support everything that Desktop OS do.

Is that a modem driver?

It's not that the board doesn't support W2k3 drivers, it's that W2k3 doesn't support the hardware/drivers, or OEM drivers aren't written for W2k3.

http://support.intel.com/support/motherboards/desktop/sb/CS-025834.htm

W2k3 is not listed as a supported OS on this board.

If you want to try this, you'll have to manually select the driver from a list; I doubt it will auto-configure.

by erickson147

I contacted Intel and spoke with a guy who told me that the board doesn't support server platforms. He suggested upgrading to a server board.

Also, the Intel Management Engine driver controls the fans (PCI simple communications)

by trohgal

To get the HECI driver to install I did the following:
Download Intel Management Engine
unpack the HECI driver files, open the HECI.inf in Notepad, under the Manufacturer and Models Section I removed the one line under [Intel.NTx86.5.2] and replaced it with the content from [Intel.NTx86.5.1]
then install by right click on HECI.inf

This discussion is closed to new replies.