Question Locked

Intermittent NO boot - No - beeps - CD/HD/FAN on only

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Started a few weeks ago. Sometimes when the pc is powered on, it won't boot. Doesn't go to bios. I can hear the case fan on high as it does at first boot, I hear the HD and see the Optical drives activity lights flash.

Sometimes it comes right up, sometimes it takes 5 hard boots.

Nothing has been changed hardware or software wise in several months.

PC was a 'cheapo sale' at Best Buy but it was good setup. Just thought I would get more than 1 year out of it. I still have an old 2000 compaq running 24x7 as a server with not issues.

I have tried resetting all cables and connections in and out but not change. Heat is not an issue. Is this an intermittent MB or Power Supply issue?

Sorry I am at work and forgot to write the model of pc down before I came in.

I searched many forums but all started in the discussion forum and were told to move it to the Question forum (for obvious reasons) but I couldn't ever pick up the thread at that point.

Much appreciated!

8 replies

by oh smeg

The inability to boot is a PS issue and you should replace the PS with a decent Name Brand unit.

Something like an Antec 300 W will do a better job than a no name 500 W unit and will offer better protection to the insides of the case.

Col

by boonefly

from what I have found so far - the PS has been linked but with all the other articles I did find - the system didn't work at all whereas mine does boot quite often but seems to have a streak here and there where it just won't for a few boots.

Yep - PS is always an ok thing to upgrade and quite cheap as compared to a new MB.

Must be all the cat hair floating around at this time of the year clogging it up. Them kitties love a good warm spot to sleep :)

by gothmog

Got the exact same issue. Did replacing the PS work for you?

thanks!

by boonefly

But I can always use a better PS. Turns out this is an issue with that MB. It is not the CPU. See these attached links for more info but this really only applies to this stinky MB. It was cheap for a reason. Seems like it and the models similar to it by Foxconn all started having this issue about 1-1.5 yrs after being deployed.

I found a nice cheap replacement at newegg and all is well. I had to replace as I didn't realize that if I could just update the Bios when it could boot - I could have saved myself some $ but this board only supported the floppy flash method and I really didn't wan't to go out and buy one.

http://forums.techpowerup.com/showthread.php?t=30405

http://forums.amd.com/forum/messageview.cfm?catid=22&threadid=85765

http://forums.techpowerup.com/showthread.php?t=16708&highlight=C51GU01

Newegg supplies that were compatible to my setup (AMD X2 4-slots ram....yada yada ATX)

Sorry for the delay in responding...

Google your MB info and you might be surprised to find your answer. Initially I didn't as the problem was pretty new. When I looked a month or so later, wow - the amount of dead on hits grew.

by gothmog

thanks for your reply boonefly!

Oh well.. I sure hope it's not the MB. Anyhow, I think I'll try my luck with DELL, lets see what their support is worth. If it's really the MB I guess I will want a replacement. The machine is still pretty new. I will also browse your links.

again my thanks!

by eissambo

use The windows Xp and at boot point or console
choose R to repair and latter it will prompt you to CMD>type bootcfg /list
>bootfcg /rebuld
>fast detect
exit
note this will only allow you to fix bad sector

by Former member

You will have to take the side of your case off and place the case on its side, then push down lightly on the processor and fan, then turn on your computer, it will boot up as normal, but take off the pressure from the heatsink and your computer monitor will go black.
The best bet would be a new motherboard that will take your type of processor.

Please post back if you have any more problems or questions.

This discussion is closed to new replies.