General discussion

Locked

Make P II up

By madanmule ·
we have a P II which was working fine resently but at present it is not giving display,we had changed the smps still the display is not there we have 5 to 6 Pentiums on the desk connected to a single 2 kva cvt,if the monitor of the same P II is changed & connedted to other Pentium It works fine, if the all m/c's are off then the conserned P II works fine with its own Monitor but if another m/c Is made on the display Of the concerned m/c goes off emidiately & its smps work ie.fan rotates.
please help me out of this situation.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Make P II up

by shuja52 In reply to Make P II up

You have probably faulty cables for this particular monitor oin the PII Sysytem

Collapse -

Make P II up

by madanmule In reply to Make P II up

The question was auto-closed by TechRepublic

Collapse -

Make P II up

by Ann777 In reply to Make P II up

I suggest you try the monitor and computer in a different port on the kvm. Your kvm switch may have problems with certain ports/connectors. But, because it sounds as if the monitor itself is fine (as evidenced by connecting it to another port), then I'd recommend you look at the ports itself.

Try another working computer/monitor set on the current non-working set and see if you get the same results.

The equipment may also have issues with quantities. Too much of an electrical draw could detract from other devices on the power. Try wiring from another outlet as well.

Collapse -

Make P II up

by madanmule In reply to Make P II up

The question was auto-closed by TechRepublic

Collapse -

Make P II up

by madanmule In reply to Make P II up

This question was auto closed due to inactivity

Back to Desktop Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums