Discussion Locked

modem driver

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've internal modem card . But I've no driver for that card. So I would like to know how install the driver from the windows (for win98).
Pls answer my question.
Thanks.

7 replies

by gigelul

Hi,
Temporary you can install a standard modem driver from Win9x using Add New Hardware from Control Panel.
But you must identify the manufacturer of the modem or open the case and try to identify the chip set or any other identifier no. and do a search on Internet (www.google.com - search) for adequate driver and install it.

by thechas

There are acouple of good sites to help you identify your modem, and direct you to the correct website to download drivers.

Start with www.driverguide.com
Go through the step by step guide to help identify what you need.

Another site that mayhelp you identify the modem is www.belarc.com
Download the advisor (it fits on a floppy), and run it on the PC. If the modem properly identifies itself, you should be able to find the drivers easily.

Other sites:
www.modemhelp.org
www.sisoft.com
www.k56.com

If this was a pre-built PC, try the manufactures web site.

Chas

by fenaikh

Hi
In addtion to the top answers.There are 2 type of internal modem.The software modem witch is called winmodem wich requier a sepecific software because it use your CPU to process.The other is the reguler modem witch des not use your processor.SSO first you should know your type and model of your modem then check with the manufacurer site for driver for win98 you may find updated one.
then check the above answer given sites.

Good luck

Mohamed

This discussion is closed to new replies.